Optimize Extender Location - D-Link DAP-1610 User Manual

Section 3 - Configuration

Optimize Extender Location

The Status/WPS LED will turn solid green when the DAP-1610 has connected successfully to a wireless network and is extending
that network. If the Smart Signal LED has a single amber bar after the connection process has finished, the DAP-1610 has
established a poor quality connection. The more lit bars on the Signal Indicator LED, the better the wireless signal. To improve the
connection quality, the DAP-1610 should be relocated closer to the source wireless router. If the extender has been configured as an
Access Point and is connected via Ethernet cable to an uplink network, the Smart Signal LED will not be lit.
Best
Good
Ok
Poor
D-Link DAP-1610 User Manual 14