Setting The Clock - Philips BTM630/05 Quick Start Manual

1
Connect the MW and FM antennas.
2
Connect the AC power adaptor of the system.

Setting the clock

1
In standby mode, press
➜ SET CLOCK is displayed briefly. Then, 12HR or 24HR is displayed.
2
Press
ALBUM•PRESET +/-
clock mode. Press
PROG
confirm.
➜
The clock digits for the hours continue to flash.
3
Press
ALBUM•PRESET +/-
hours.
4
Press on the system (or
PROG
➜
The clock digits for the minutes flash.
5
Press
ALBUM•PRESET +/-
minutes.
6
Press on the system (or
PROG
time.
FM wire antenna
2
on the system (or
PROG
on the system (or
on the system (or
PROG/CLOCK
on the system (or
PROG/CLOCK
on the system (or
3/4
PROG/CLOCK
1
AC power adaptor
on the remote control).
PROG/CLOCK
on the remote control) to select
3/4
on the remote control) to
on the remote control) to set the
3/4
on the remote control) again.
on the remote control) to set the
on the remote control) to confirm the
Tips
– See the User Manual for how to
connect other equipment to this
system.
– Use the supplied AC power
adaptor only! Using any other
power connection device may
damage your main set!
MW loop
antenna