Page 1
Register your product and get support at www.philips.com/welcome EN User manual DA Brugervejledning DE Benutzerhandbuch ES Manual del usuario FR Mode d’emploi Manuale utente NL Gebruiksaanwijzing SV Användarhandbok Docking Entertainment System DC190...
Contents 1 Important Safety Notice 2 Your Docking Entertainment System Introduction What’s in the box Overview of the main unit 3 Get started Connect power Set clock Turn on Adjust volume 4 Play Play from iPod Play from an external device 5 Listen to radio Tune to a radio station Program radio stations automatically...
European Community. This product complies with the requirements of the following directives and guidelines: 2004/108/EC + 2006/95/EC device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment.
2 Your Docking Entertainment System Congratulations on your purchase, and support that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can enjoy audio from the iPod, other audio devices, or the radio. The radio, iPod, or buzzer can be set as the alarm timer.
Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No.
Connect the other end of the AC adaptor to the wall outlet. Set clock In standby mode, press and hold TIME SET/AUTO SCAN for 2 seconds. » The hour digits begin to blink. Press TUNING +/- to set the hour. Press TIME SET/AUTO SCAN.
Place the iPod in the dock. Remove the iPod Pull the iPod out of the dock. Listen to the iPod Ensure that the iPod is loaded correctly. Press SOURCE repeatedly to select iPod source. » The connected iPod plays automatically. To pause/resume play, press To skip to a track, press To search during play, press and...
Program radio stations manually You can program a maximum of 20 preset radio stations. Tune to a radio station. Press TIME SET/AUTO SCAN to activate the program mode. » The preset number begins to blink. Press PRESET +/- to select a number. Press TIME SET/AUTO SCAN to Repeat the above steps to program other stations.
Stop alarm ring When the alarm rings, press the corresponding ALARM 1 or ALARM 2. » The alarm stops but the alarm settings remain. View the alarm settings Press ALARM 1 or ALARM 2. Set the sleep timer This unit can switch to standby automatically after a set period of time.
If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.