Table of Contents
Advertisement
How to mount your MCM277
onto walls
IMPORTANT!
– The wall mounting instructions are for
the use of the qualified wall mounting
person only!
– Ask a qualified person to help you
with the wall mounting, which includes
drilling holes on the wall and
mounting the set onto walls.
What's in the supplied mounting kits
140 mm (5.51")
What else you'll need
– Drilling tools (e.g. electric drill)
Preparation
1
To find a suitable location for mounting, try
your necessary rear connections (see
the chapter Installation).
2
Ask a qualified person to help you with the
wall mounting, who should:
– to avoid unexpected damage, learn about the
piping, wiring and other relevant information
inside your walls;
– according to the drilling requirements, choose
suitable drilling tools;
– take other precautions necessary for the wall
mounting work.
1
2
3
1 x template
(Wall mounting
instructions)
2 x screws
4
5
6
Mounting your MCM277
Align the template in the chosen location on a
wall. Use a pencil to mark the drilling positions
(as shown)
140 mm (5.51")
Drill two 6mm diameter holes as marked
Secure the dowels and screws in the holes
respectively, leaving the screws 5mm proud of
the wall
To detach the stand,
a. As shown, hold down the 3 PRESS buttons
b. Move out the stand to detach
PRESS
Hang the unit on the fastening screws
As shown, hook and mount the speakers in
place
Appendix
PRESS
27
Advertisement
Table of Contents
