Listen To Radio; Tune To A Radio Station; Program Radio Stations Automatically; Program Radio Stations Manually - Philips DCM276/37 User Manual

6 Listen to radio

Tune to a radio station

1
Press TUNER to select FM.
2
Press and hold
seconds.
»
[SEARCH] (search) is displayed.
»
The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station, press
reception.
Program radio stations
automatically
You can program a maximum of 20 preset
radio stations (FM).
1
In the tuner mode, press and hold PROG/
CLOCK SET for more than 2 seconds to
activate automatic program mode.
»
[AUTO] (auto) is displayed.
»
All available stations are programmed
in the order of waveband reception
strength.
»
broadcast automatically.
16 EN
/ for more than 2
Program radio stations
manually
You can program a maximum of 20 preset
radio stations (FM).
1
Tune to a radio station.
2
Press PROG/CLOCK SET to activate
program mode.
»
[PROG] (program) is displayed.
3
Press / to allocate a number to this
radio station, then press PROG/CLOCK
SET
4
Repeat the above steps to program other
/
stations.
Tip
To overwrite a programmed station, store
another station in its place.

Select a preset radio station

1
In tuner mode, press / to select a
preset number.
Tip
Position the antenna as far as possible from
TV, VCR or other radiation source.
For optimal reception, fully extend and adjust
the position of the antenna.