Basic Functions; Plug And Play; Demonstration Mode - Philips FW-C115/22 User Manual

Basic Functions

STANDBY
ON
C D 1 • 2 • 3
CD
DSC
IMPORTANT!
Before operating the system, complete the
preparation procedures.

Plug and Play

Plug and Play allows you to store all available
radio stations automatically.
First time setup/power up
1
When you turn on the main supply, "AUTO
INSTALL - PRESS PLAY" is displayed.
2
PressÉ Å on the system to start installation.
"INSTALL" is displayed, followed by "TUNER"
and "AUTO".
starts flashing.
PROG
All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by MW and LW band.
When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
To reinstall Plug and Play
1
In standby or demonstration mode, press and
holdÉ Å on the system until "AUTO INSTALL
- PRESS PLAY" is displayed.
2
PressÉ Å again to start installation.
All previously stored radio stations will be
replaced.
12
pg 001-026/C115/22-Eng
BAND TAPE 1 • 2 VIDEO
TUNER TAPE
AUX
SEARCH STOP• CLEAR PLAY• PAUSE PREV NEXT
TUNING DEMO STOP PRESET
DYNAMIC
PROG CLOCK•TIMER
BASS BOOST
DIGITAL SOUND CONTROL
To exit without storing the Plug and Play
Press Çon the system.
installation, the function will be restarted when
you next turn on the main supply again.
Notes:
– When the power is turned on, the disc tray may
open and close to initialise the system.
– If no stereo frequency is detected during
Plug and Play, "CHECK ANTENNA" will be
displayed.
– During Plug and Play, if no button is pressed
within 15 seconds, the system will exit Plug and
Play mode.

Demonstration mode

The system has a demonstration mode that
shows the various features offered by the system.
To activate the demonstration
In standby mode, press and holdÇon the
system until "DEMO ON" is displayed.
To deactivate the demonstration
Press and holdÇon the system until
"DEMO OFF" is displayed.
Note:
– If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to standby mode.
12
CD
DIM
MASTER
1
VOLUME
REPEAT
à
If you do not complete the Plug and Play
The demonstration will begin.
The system will switch to standby mode.
3139 115 21361
12/24/01, 9:39 AM
2
TAPE 1/2 TUNER
AUX
SLEEP
CD DIRECT
2 3
PAUSE
SHUFFLE
Å
VOLUME
É
í ë
Ç
á
MUTE
DSC DBB