DeWalt XR LI-ION DCB090 Original Instructions Manual page 48

EN G LI S H
Important Safety Instructions for All Battery
Packs
When ordering replacement battery packs, be sure to include the
catalog number and voltage.
The battery pack is not fully charged out of the carton. Before using the
battery pack and charger, read the safety instructions below and then
follow the charging procedures outlined.
READ ALL INSTRUCTIONS
• Do not charge or use the battery pack in explosive
atmospheres, such as in the presence of flammable liquids,
gases or dust. Inserting or removing the battery pack from the
charger may ignite the dust or fumes.
• Never force the battery pack into charger. Do not modify the
battery pack in any way to fit into a non-compatible charger
as battery pack may rupture causing serious personal injury.
• Charge the battery packs only in designated D
• DO NOT splash or immerse in water or other liquids.
• Do not store or use the tool and battery pack in locations
where the temperature may reach or exceed 40 ºC (105 ºF)
(such as outside sheds or metal buildings in summer).
• For best results, make sure the battery pack is fully charged before
use.
WARNING: Never attempt to open the battery pack
for any reason. If the battery pack case is cracked or
damaged, do not insert it into the charger. Do not crush,
drop or damage battery pack. Do not use a battery pack
or charger that has received a sharp blow, been dropped,
run over or damaged in any way (e.g., pierced with a
nail, hit with a hammer, stepped on). Electric shock or
electrocution may result. Damaged battery packs should
be returned to the service centre for recycling.
46
WALT chargers.
E