Correct Use - Miele PWM 300 SmartBiz Operating And Installation Instructions

Hide thumbs Also See for PWM 300 SmartBiz:
Table of Contents

Advertisement

Warning and safety instructions
If the appliance is hard wired, an on-site all pole circuit breaker
must always be accessible to disconnect the washing machine from
the mains.
Reliable and safe operation of this washing machine can only be
assured if it has been correctly connected to the mains electricity
supply.

Correct use

The maximum dry laundry weight is 7.0 kg. The maximum recom-
mended loads for individual programmes are given in the Programme
chart.
Do not install your washing machine in a room where temperat-
ures below freezing may occur. Frozen hoses may burst or split. The
reliability of the electronic control unit may be impaired at temperat-
ures below freezing point.
Before using the machine for the first time, check that the transit
bars at the rear of the washing machine have been removed (see "In-
stallation – Removing transit bars"). During spinning, transit bars
which are still in place may result in damage to both the machine
and adjacent furniture or appliances.
Close the stopcock if the machine is to be left for any length of
time (e.g. while on holiday), especially if there is no floor drain (gully)
in the immediate vicinity.
Danger of flooding! If hooking the drain hose into a wash basin,
check that the water can drain off quickly enough to prevent the sink
from overflowing. Hook the hose over the edge and secure. If the
hose is unsecured, the force of the water flowing out of it can dis-
lodge it from the basin.
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents