English Supplied Accessories – AC power cord Top/front panels 1 Source selector: CD, FM, MW or OFF – selects CD or radio (FM/MW) source of sound – power off switch 2 2; – starts or pauses CD playback § ∞ –...
Power Supply Using AC power WARNING: Always check you have completely switched off the set, before you change or disconnect power supply. 1 Check if the power voltage, as shown on the type plate located on the bottom of the set, corresponds to your local power supply.
CD Player Playing a CD • This CD player plays Audio Discs including CD-Recordables (CD-R) and CD-Rewritables (CD-RW). • MP3, CD-ROM, CD-I, CDV,VCD, DVD or computer CDs are not possible for playback. IMPORTANT! CDs encoded with copyright protection technologies by some record companies may be unplayable by this product.
CD Player Reviewing the program In the stop position, press PROG repeatedly to see your stored tracks. Erasing a program You can erase the contents of the memory – in the stop position, press PROG to enter program mode, and then press 9; –...
Maintenance & Safety (See 7) CD player and CD handling • If the CD player cannot read CDs correctly, use a cleaning CD to clean the lens before taking the set to repair. • The lens of the CD player should never be touched! •...
Troubleshooting If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service centre. WARNING: Do not open the set as there is a risk of electric shock. Under no circumstances should you try to repair the set yourself, as this will invalidate the guarantee.
Disposal of your old product Your product is designed and manufactured with high quality materials and com- ponents, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.