Yamaha YZF1000 YZF-R1 Owner's Manual page 41

respective upshift or downshift func-
tion off, and the clutch lever must then
be used when shifting in that direction.
TIP
 Set QS
to 1 for track or sporty
riding.
 Set QS
to 2 for touring or
around town-riding.
LIF
LIF can be set to 1, 2, 3, or OFF. Set-
ting level 3 most strongly reduces
wheel lift, and setting level 1 provides
the least amount of system interven-
tion. OFF turns LIF off and LCS will be
disabled for the selected YRC mode.
1
LIF
2
1. System intervention
2. Wheel lift
EBM
This system has three settings. Level 1
provides the least amount of engine
brake management intervention, and
therefore the strongest amount of en-
gine braking. Level 3 provides the
greatest amount of engine brake man-
agement intervention, and therefore
the least amount of engine braking.
BC
Select BC1 when only standard ABS is
desired. Select BC2 to have the brake
control system regulate brake pressure
while cornering to suppress lateral
wheel slip.
TIP
For skilled riders and when riding at the
track, due to varying conditions BC2
3
2
brake system engagement may come
1
on sooner than expected relative to
your desired cornering speed or in-
tended cornering line.
To customize a YRC mode or adjust a
YRC item
1. From the MENU screen, select
"YRC Setting".
4-18
Instrument and control functions
km/h
2. The "YRC Setting" screen is dis-
played, and the YRC mode box
"YRC" is highlighted. Short push
the wheel switch to enter the box
and then select the YRC mode A,
B, C, or D that you want to adjust.
10 : 00
MENU GPS
Display Mode
YRC Setting
Lap Time
Logging
Maintenance
Unit
4