Philips AZ1117/10 User Manual page 6

CD DISPLAY INDICATION
– Total track number: in stop position.
– Current track number: during CD play.
– Current track number flashes: in PAUSE mode.
– SHUFFLE/REPEAT mode: the respective mode is activated.
– PROGRAM: program function is active. P also appears briefly when
you store a track.
– No display: error in CD operation or with the CD
(see Troubleshooting).
PLAYING A CD
1. Set the source selector to CD.
2. To open the CD compartment, press OPEN on the CD door.
3. Insert the audio CD, printed side facing up.
4. To close the CD compartment, push the door down.
– The CD player scans the contents of the CD and the total number of
tracks is displayed
5. Press PLAY•PAUSE 2; to start playback.
6. Adjust the sound using the VOLUME control and the DBB switch.
7. To interrupt playback, press PLAY•PAUSE 2;.
Press PLAY•PAUSE 2; again to continue playback.
8. Press STOP 9 to stop CD playback.
9. Set the source selector to TAPE/POWER/OFF position to switch off the
set.
Note: CD playback will also stop when:
– the CD has reached the end;
– the CD door is opened;
– the source selector is in the RADIO or TAPE/POWER/OFF position.
SEARCH ∞ or §
Selecting a different track during playback
– You can jump to the next track by pressing SEARCH § once. If you
want to skip more than one track, press SEARCH § more than once
until the display shows the desired track number.
– If you want to repeat the running track from the beginning, press
∞ SEARCH once. If you want to repeat one of the previous tracks,
press ∞ SEARCH more than once until the display shows the
required track number.
Starting with a particular track
1. In the STOP position you can select a desired track using the
∞ SEARCH or SEARCH § button.
2. Press PLAY•PAUSE 2; to start playback.
CD PLAYER
REPEAT SHUFFLE
ALL
PROGRAM
S T O P
SH U FF
LE
S E A R
C H
M O D E
SH U FF
LE
7