Set to factory default 9 Product information 10 Frequently asked questions 11 Glossary Need help? Please visit www.philips.com/welcome where you can access a full set of supporting materials such as user manual, the latest software updates and answers to frequently asked questions.
No components are user serviceable. Do not open or remove covers to the inside of the product. Repairs may only be done by Philips Service Centres and offi cial repair shops. Failure to do so shall void any warranty, stated or implied.
Philips is committed to develop, produce and market products that cause no adverse health effects. Philips confi rms that if its products are handled properly for their intended use, they are safe to use according to scientifi c evidence available today.
SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ. Banned Substance Declaration This product complies with RoHs and Philips BSD (AR17-G04-5010-010) requirements.
2 Your PhotoFrame Congratulations on your purchase, and welcome to Philips! To fully benefi t from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With Philips Digital PhotoFrame, you can display JPEG photos in high quality. You can place it on a fl at surface or hang it on the wall for a continuous display.
• (For SPF2047) Extra silver frame with design Overview of your PhotoFrame • Turn on/off the PhotoFrame • Play slideshow • Toggle between slideshow mode, browse mode, and calendar mode / / / • Select the previous/next/right/left option d OK •...
Page 8
• Slot for a USB cable to PC SD/MMC/xD/MS/MS Pro • Slot for an SD/MMC/xD/MS/MS Pro card j DC • Socket for the AC-DC power adaptor k Stand hole l Wall mounting hole...
Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus.
For the fi rst time use: Press and hold for more than 1 second. » The language setting menu is displayed. Select a language, and press OK to confi rm. » Help message for control keys is displayed. Press any button to exit the help message. »...
Connect PC Caution • Do not disconnect the PhotoFrame from the PC when fi les are transferring between the PhotoFrame and the Connect a suitable USB cable to the PhotoFrame and to the PC. » You can drag and drop photos from the PC to the internal memory of the PhotoFrame.
4 Display photos Note • You can play only JPEG photos on the PhotoFrame. In the main menu, select [Photos] and then press OK to confi rm. » Available photo sources are displayed. Select a photo source, and then press OK to confi...
5 Browse photos in thumbnail mode and access photo menu You can browse multiple photos in thumbnail mode. In thumbnail mode, you can access the photo menu to edit photos. In the main menu, select [Photos] and then press OK to confi rm. •...
Copy photos Caution • Never remove a storage device before the copy or delete action completes. In [Photo Menu], select [Copy to] and then press OK to confi rm. Select a target folder, and then press OK to start copy. •...
Select a photo frame In [Photo Menu], select [Frames] and then press OK to confi rm. Select a frame, and then press OK to confi rm. Rotate a photo In [Photo Menu], select [Rotate] and then press OK to confi rm. Select an orientation, and then press OK to confi...
6 Manage an album Create an album You can create an album on the PhotoFrame and on a storage device connected to the PhotoFrame. In the main menu, select [Photos] and then press OK to confi rm. Select a photo source, and then press OK to confi...
Delete an album Select an album. Press to access the album menu. Select [Delete Album], and then press OK to confi rm. » A confi rmation message is displayed. Select [Yes], and then press OK to confi rm. Rename an album Select an album.
7 Slideshow Select slideshow sequence You can display the slideshow in sequence or randomly. In the main menu, select [Slideshow] and then press OK to confi rm. Select [Slideshow sequence], and then press OK to confi rm. Select an option, and then press OK to confi...
Select slideshow frequency In the main menu, select [Slideshow] and then press OK to confi rm. Select [Frequency], and then press OK to confi rm. Select a transition time, and then press OK to confi rm. Display collage photos In the main menu, select [Slideshow] and then press OK to confi...
Repeat steps 5 to 7 until all photos are selected for the format. Press to start collage display. • To stop collage display, select [Slideshow] > [Collage] > [Single] and then press OK to confi rm. • If you select a collage layout, the PhotoFrame displays a static collage and the slideshow mode is deactivated.
Page 21
» If you select [RadiantColor], the PhotoFrame extends the color on the edges of a photo that is smaller than the full screen to fi ll the screen without black bars or aspect ratio distortion.
8 Setup Select on-screen language In the main menu, select [Setup] and then press OK to confi rm. Select [Language], and then press OK to confi rm. Select [Language Setting], and then press OK to confi rm. Select a language, and then press OK to confi...
Select [Memory Card], and then pres OK to confi rm. Select [Delete enable] / [Delete disable], and then press OK to confi rm. Set an event reminder You can create a reminder for a special event, and you can also select a photo to be displayed at a selected time.
» A keypad is displayed. To enter the new name (up to 24 characters), select an alphabet/number and then press OK to confi rm. • To switch between uppercase and lowercase, select [abc] on the displayed keypad and then press OK to confi...
Set on/off a reminder In the main menu, select [Setup] and then press OK to confi rm. Select [Event Reminder], and then press OK to confi rm. Select a reminder, and then press OK to confi rm. Select [Set], and then press OK to confi...
You can select a photo to display for a reminder. Each event reminder activates the latest defi ned photo only. If there is no defi ned photo, the reminder takes the default Philips start up photo. In the main menu, select [Setup] and then press OK to confi...
Set snooze In the main menu, select [Setup] and then press OK to confi rm. Select [Event Reminder], and then press OK to confi rm. Select [Snooze], and then press OK to confi rm. Select an options, and then press OK to confi...
Select [Set time] / [Set date], and then press OK to confi rm. Press / / / and OK to enter the current time/date, and then press OK to confi rm. Set time and date format You can set the format of the time and date displayed on the PhotoFrame.
Select [Set time format] / [Set date format], and then press OK to confi rm. Select the time/date format, and then press OK to confi rm. Show clock You can show clock or calendar in slideshow on the PhotoFrame. In the main menu, select [Setup] and then press OK to confi...
Set display auto on/off by time You can confi gure the time for the PhotoFrame to turn on or off the display automatically. Note • Ensure that you set the current time and date of the PhotoFrame before you set the auto on/off function. In the main menu, select [Setup] and then press OK to confi...
Press / / / and OK to set the time for auto-on/auto-off function, and then press OK to confi rm. • Weekday: Monday 00:00 to Friday 23:59 • Weekend: Saturday 00:00 to Sunday 23:59 View status of the PhotoFrame You can fi nd the free space, connected media, and the fi...
Select [Auto Orientation], and then press OK to confi rm. Select [Enable] to set on auto orientation function, and then press OK to confi rm. • To set off auto orientation function, select [Disable] and then press OK to confi rm. Set button sound In the main menu, select [Setup] and then press OK to confi...
Select [DEMO], and then press OK to confi rm. Select [On], and then press OK to confi rm. Set to factory default In the main menu, select [Setup] and then press OK to confi rm. Select [Settings], and then press OK to confi...
10 Frequently asked questions Is the LCD screen touch-enabled? The LCD screen is not touch-enabled. Use the buttons on the back to control the PhotoFrame. Can I switch different slideshow photos by using different memory cards? Yes. When a memory card is connected to the PhotoFrame, you can play photos on the specifi...
11 Glossary Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high-defi nition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen.