Ethernet Interface Xlan; Xvga Interface; Fig. 7-6: Ethernet Interface Xlan - Bosch Rexroth VSB 40.1 Project Planning Manual

VSB 40.1

Ethernet Interface XLAN

XLAN – Network Connection

XVGA Interface

XVGA - Connection of an
External Monitor
DOK-SUPPL*-VSB*40.1***-PR01-EN-P
The industrial PC can be connected with an Ethernet network via an
Ethernet interface XLAN.
RJ45 female connector, 8-pin
Type:
Cable length:
Cable type:
Transmission rate:
XLAN, RJ45
8
1
Fig. 7-6: Ethernet interface XLAN
The driver configuration of the network connection can be called up in the
task bar or in the "Control Panel" with icon "Network Board". Here you can
set among other values, if the data transmission shall occur with
10 Mbits/s and/or with 100 Mbits/s.
Note: Please observe that the network board of the outstation has to
be able to process the same data transmission rate.
An external monitor (CRT) can be connected to the VGA connection
(XVGA) and can be operated as an alternative or parallel to a VDP
connected via the GIGASTAR interface.
• Video RAM: Max. 8 MB
Note: Before plugging-in a graphics card the video adapter
integrated in BIOS has to be switched off.
HD female connector, 15-pin
Cable length:
Cable type:
Max. resolution:
Ethernet 10Base T / 100Base X
Max. 100 m
Shielded, twisted pair
10 or 100 Mbits/s
max. 100 m
1
2
3
4
5
6
7
8
Max. 1.5 m
Shielded, cross section min. 0.14 mm²
1600 x 1200 Pixel, max. 4294 mill.
colors
7-5
PC Box
To the network
Ethernet_sst.cdr