Make A Call; Receive Call - Philips CED1700/51 User Manual

Disconnect Bluetooth devices
1
To disconnect one device, touch
»
(green) is displayed.
Re-connect Bluetooth devices
1
Touch on top of the screen.
» The bluetooth/paired device screen
displays.
2
Touch on one device that you want to
re-connect.
3
Touch (green).
» Start to re-connect the selected
device.
Tip
‡
The device will also be disconnected when the
device is moved beyond the operational range.
‡
If you want to reconnect the device to the
unit, place it within the operational range.
‡ If you do not want to reconnect the device to
the unit automatically, under Bluetooth mode,
touch , and then touch option after [Auto
connect] repeatedly until [Off] displays. For
details, see the "Adjust Bluetooth settings"
section.

Make a call

You can make phone call with the unit under
any mode.
Note
‡
Make sure the phone is connected to the unit
via Bluetooth.
1
Touch on top of the screen.
» The dial screen displays.
2
Touch number icons directly to input
phone number.
(red).
‡ Touch
‡ Touch
menu.
‡ Touch
screen.
3
After the phone number entered, touch
.
» The unit starts dialing.

Receive call

By default, all incoming calls are received
automatically.
1
If there is incoming call, [Incoming call...]
ÁDVKHV RQ WKH VFUHHQ 6SHDN LQWR WKH
Bluetooth microphone.
2
When conversation ends, tap
to terminate the call.
Tip
‡ You can select to receive calls manually by set
[Auto answer] to [Off] status.
Switch phone call to the mobile
If you do not want your passenger to hear
your incoming call, you can switch the call to
the mobile.
1
During talking, tap
» The voice is transferred from the unit's
loudspeaker to the mobile phone.
to delete last input
c
to access Bluetooth option
to go back to previous
(red)
.
EN 23