Configuration 1 Menu - Philips BDL5545E/00 User Manual

4.2.5. CONFIGURATION 1 MENU

Switch on state
Set the display to turn on or remain off when the power cord is connected to a wall outlet. Press the
SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle between
x Power off - Select to power off the display.
x Forced on - Select to power on the display.
x Last status – Select to turn the display on or off depending on the last power status (i.e no change to
the status).
Auto adjust
Note: For VGA input only.
Use this function to let the display automatically optimize the display of VGA input image.
Press the SET/PLUS button to open the submenu, and then press the SET button to adjust.
Power save
Set the display to reduce the power automatically.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle
between
x PC - Select ON to make the monitor enter DPMS mode (Display Power Management Signaling) when no
signal can be detected from the DisplayPort
Use the PLUS/MINUS button to make selection.
x VIDEO - Select ON to make the display enter power saving mode when no signal is detected from the
Component input after three successive cycles. Use the PLUS/MINUS button to make selection.
Language
Select the language for the OSD menu.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle
between
x English x Deutsch
x Pycc x
x Polski x Français
x Italiano x Español
x T rkçe
, HDMI, DVI-D, and VGA inputs after three successive cycles.
38
User Manual BDL5545E