Playing A Recordedcassette; Fast Wind And Rewind; Picture Scanning - Philips 14PV172/05 Operating Instructions Manual

5. PLAYING A RECORDEDCASSETTE

In Chapter 2 you connected the TV Combi. Playing a
cassette is now very simple.
If you want to record something straight away, first
read Chapter 6.
1
Switch on the set or insert a cassette into the
cassette slot with the window facing upward.
2 PLAY G
Press the playback button.
PLAY
1245
3
If you wish to interrupt playback, press the
STOP h
button.
PAUSE
1245
4
If you wish to remove the cassette, press the
J
button on the set.
Note:
* Some functions switch off automatically after a
while (e.g.: Pause, Still Picture, Scanning). This
helps to protect the cassette and prevent
unnecessary power consumption.
* With this set you can play back cassettes that
have been recorded on other videorecorder in
the NTSC standard.
* If you load a cassette with erase protection, the
TV combi starts the playback automatically.
* Remove the cassette before transporting the
TV Combi.
20:00
1
20:00

Fast wind and rewind

1
Stop the tape. Press the
(Wind) button on your remote control. The tape is
wound at high speed.
WIND
1245
PLAY G
2
Press the playback button as soon as
you have reached the required position on the
tape.

Picture scanning

You can select from various speeds for scanning
backwards or forwards.
PLAY G
1
Press the playback button.
SCAN FORWARD
1245
H
2
Now press the
necessary until you have reached the desired
speed.
The TV screen will show e.g. 'SCAN FORWARD' .
Note:
* The picture quality is affected during scanning.
You will notice this particularly with long play
(LP) recordings. The sound is turned off.
H I
(Rewind) or
1
20:00
1
20:00
I
or button as often as
11