Attaching the Fabric Sub- Assembly to the Frame
To attach the Fabric Sub- Assembly, complete the following steps.
Step 1
Clean the working area of dirt and debris.
Place the foam sheet down on your working area.
Step 2
Tip
You can also use the old screen as a work surface.
Step 3
Put on the gloves that are included with the kit.
Lay the Fabric Sub- Assembly flat on the foam sheet.
Step 4
Figure 1-24
Fabric Sub- Assembly
Lay the left frame on the Fabric Sub- Assembly(front) aligning the outer edges.
Step 5
Figure 1-25
Frame and Fabric Sub- Assembly
Step 6
Align the bracket holes on the frame with their corresponding curves in the Fabric Sub- Assembly.
Step 7
Locate the START THE FABRIC INSTALLATION FROM THIS END label on the narrow side of
the frame.
32
OL-23393-01