EEV KIT INSTALLATION
Product installation
1
Remove the screws to separate the cover plate and base plate of the EEV KIT.
1) Remove the two screws
from the EEV KIT's base
plate.
Move the screws to
separate the cover plate and
base plate of the EEV KIT.
2
Drill holes in the correct locations and use 4 screws (M5, not provided) to affix the EEV KIT.
A
Pipe diameter
Ø19.05 mm (5/8")
2) Remove the base plate.
B
Hole size
Ø6 mm (1/4")
Pipe diameter
Ø19.05 mm (5/8")
EEV KIT INSTALLATION
3) Remove the four
screws from the
cover plate
4) Remove the cover
plate.
Model name
A
273 mm
PRLK594A0
(10-3/4")
273 mm
PRLK396A0
(10-3/4")
7
length
B
250.3 mm
(9-6/7")
190.3 mm
(7-1/2")