Getting Started; Accessories List; Installing The Stand Or Wall Mount Bracket - Toshiba LED TV Series Owner's Manual

Accessories List

The following accessories are included with TV:
24"
Owner's Manual Base Stand × 1
AAA Battery × 2 Screw × 2
P-clip x 1
32"
Owner's Manual Base Stand × 2
AAA Battery × 2 Screw × 4
P-clip x 1

Installing the Stand or Wall mount bracket

Installing the Stand
CAUTION
• Be sure to disconnect the A/C power cord before installing a stand
or Wall-Mount brackets.
• The LED display is very fragile, and must be protected at all times
when installing the base stand. Be sure that no hard or sharp
object, or anything that could scratch or damage the LED display,
comes into contact with it. DO NOT exert pressure on the front of
the TV at any time because the screen could crack.
1. Carefully place your TV face-down on a soft, flat surface to
prevent damage to the TV or scratching to the screen.
2. Remove the stand from the accessory bag and then insert the
stand into the bottom slot of the TV.
3. Secure the Base Stand to the TV with the screw in accessory
tightly.
24"
Base Stand
32"
Screws: M4x25
Base Stand

Getting started

Remote Control × 1
Power Cord × 1
Remote Control × 1
AV Cable × 1
Screws:
M3x12
Screws:
Base Stand
M4x25
Installing the wall mount bracket
Wall mount hole pattern (mm)
Wall mount screw size (mm)
Rear cover of the TV
Follow instructions provided with the Wall mount bracket.
NOTE
• The diameter and length of the screws differ depending on the
wall mount bracket model.
• Wall mount bracket is optional, your device may not have wall
mount bracket, please refer to the actual accessories.
5
200X200 mm (24")
100X200 mm (32")
4XM6
8.0 - 10.0 mm
Wall Mount Bracket
Wall Mount Screw
Wall Mount Spacer