68015000181-LB
Chapter 3: Vehicle Preparation
Figure 3: Accessory Plug
25
26
CAUTION: If the ignition line is not used, it MUST be grounded. Interference can cause
radio to hang.
NOTICE:
The terminal accepts a 12 volt or 24 volt input for the Ignition Sense line. For 24 volt
installations convert the main supply from 24 to 12 volts. For information see
Guidelines for Radio Installation on page
DC/DC converters available from Alfatronix LTD UK. Some models are also available
through Motorola Radio Aftermarket and Accessory Division (AAD), check with your
Account Manager.
The ignition sense cable kit contains a thin cable and a fuse holder.
3.4.1
Ignition Sense Cables
Table 43: Ignition Sense Cables
Number
PMKN4120_
6580283E02
44
Description
Ignition Sense Cable with fuse 4 A
Fuse 4 A for Ignition Sense Cable
1
39. Motorola recommends a suitable range of
Rating
Ignition Sense Cable, Length: 3 m
2
General
Send Feedback