Figure 3
1. Long carriage bolt (2)
2. Washer (6)
3. Locknut (6)
3.
Install the rear guard as shown in
Figure 4
1. Bolt (4)
2. Rear guard
g036876
4. Skid (2)
5. Socket-head bolt (4)
Figure
4.
g036877
3. Washer (4)
4. Nut (4)
Changing the Cutting Unit
from Left-Side Drive to
Right-Side Drive
Front Left Cutting Unit Only
1.
Remove the weight
1. Bolt (2)
2. Washer (2)
3. Weight
4. Carriage bolt—M6 (2)
2.
Remove the circlip from the left side of the
cutting unit
(Figure
3.
Install the circlip on the drive side of the cutting
unit (right side).
4.
Install the weight on the non-drive side (left side).
5.
Remove the roller guide from the non-drive side
(Figure
5).
6.
Install the roller guide on the drive side (right
side).
4
(Figure
5).
Figure 5
5. Roller guide
6. Locknut—M6 (2)
7. Circlip
5).
g037001