Siemens SIMATIC Manual page 94

Appendix
Addr Parameter Decl
68.0 PER_ INPUT
MODE
70.0 PVPER_ON INPUT
A-16
Data Range of
Type values
INT 0, 1, 2
BOOL
Initial Description
Value
0 PERIPHERY MODE
You can enter the type of the I/O
module at this switch. The process
variable at input PV_PER is then
normalized to °C at the PV output.
•
PER_MODE =0: standard
•
PER_MODE =1: climate
•
PER_MODE =2: current/voltage
PROCESS VARIABLE PERIPHERY
FALSE
ON
If you want the process variable to
be read in from the I/O, the PV_PER
input must be connected to the I/O
and the "process variable periphery"
input must be set.
PID Temperature Control
A5E00125039-02