Dell 3000CN Remanufacturing Instructions page 3

5. Now slide the cap out away from the cartridge.
7. Shown is the waste carrier chamber. Empty it out and you
will find the toner fill plug inside. Remove the plug and clean
out the cartridge for refilling.
NOTE: You will need to mix toner and carrier in the same toner
bottle before refilling the toner hopper.
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
DELL 3000CN TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
6. Remove the carrier fill plug as shown.
REPLACING THE OEM CHIP
8. Using a small flat head screwdriver, unlock the chip by
pressing on the release tab in the slot shown.
www.uninetimaging.com