Replacing The Hood Support Plate And Rear Bracket (Fru Kit: 2043937-001) - GE Lullaby Warmer Maintenance And Service Manual

7.1.7 Replacing the Hood Support Plate and Rear Bracket (FRU KIT:
2043937-001)
Description of Parts:
Step
Illustration
1.
2.
3.
Lullaby Warmer
TM
2042376-001 Rev G ©2012 General Electric Company. All rights reserved. 71
Instructions
Remove the Heater Hood from the
TM
Lullaby Warmer. Refer to the Heater
Hood dismantling procedure in section
6.3.
Remove the two screw caps & its screws
on top of the hood, which is shown as
"A".
Turn the Heater Hood upside down, pull
the swivel knob and rotate the hood
support assembly to one end as shown.
Now the two screw caps with the screw
is visible in the position shown as 3A.
Remove these two screw caps with the
screws.
s