Table of Contents
Advertisement
During the call, press i to put the
external call on hold (the caller can
no longer hear you).
• The display shows the numbers
of the handsets registered to the
base.
Scroll n to the number of the
handset you wish to establish the
conference call with and press o
Select.
Press t on the called handset to
answer the internal call, where both
internal callers can talk.
• Intercom is established.
Press c Conf. or long press i
on the first handset to start the
three-party conference.
• Conference will be displayed on
the screen once the conference
call is established.
5.11
Paging
The paging feature enables you to locate
a missing handset if the handset is in
range and contains charged batteries.
Press a on the base station.
• All the registered handsets start
to ring.
• Once a handset is found, press
c Silent on a handset to stop
its ringing.
Press a again to end the paging.
Note
If there are no key presses within 30
seconds, the handset will automatically
return to idle mode.
Use more of your phone
5.12
Clock and Alarm settings
This feature allows you to set the date,
time and alarm settings for your phone.
5.12.1 Set Date and Time
Press m in idle mode, scroll n to
Clock & Alarm, and press o
Select.
Set Date/Time is highlighted.
Press o Select.
The last stored date and time are
displayed. Enter the current time
and current date (HH:MM DD/MM/
YY). Press u to move the cursor
left, or press d to move it right.
If using the 12 hour format, just
after setting the minutes, use * to
switch between AM and PM.
Press o OK.
• A validation tone is emitted and
the screen returns to the idle
mode.
Note
The date format and time format are
initially determined by the country
selection. However, you can change the
format as shown in the next section.
5.12.2 Set Time and Date Format
5.12.2.1 Set Time Format
Press m in idle mode, scroll n to
Clock & Alarm, and press o
Select.
Scroll n to Set Format and press
o Select.
35
Advertisement
Table of Contents
