Voice Command; Network - Philips CT2888/OUABAAGB User Manual

V oice command
As for the Hotkeys, the Voice command menu also allows you to quickly
activate a specific function: instead of programming a hotkey, you simply
configure a voice tag that will activate a feature when pronouncing the
associated word. You can associate a Voice command to the functions
supported by the Hotkeys (see page 27).
To set a voice tag for voice command, press , or C to enter the main
1
menu if in idle mode, then select
2 Then select
Browse the list to select the function you wish to set with this key. Press ,
3
to confirm your choice.
4 When
displayed on the screen. When prompted to record your voice tag, make sure
you are in a quiet environment, choose a short and simple word and clearly
pronounce it.
5 The next carousel menu allows you to
function
function.
6 Repeat the steps described above to add other voice commands by associating
a voice tag to a function. Then press e to go back to the previous menu or
C to go back to idle.
To activate a feature using the voice command, press and hold , when in idle
7
mode, then say the recorded voice tag.
Words recorded as voice tags can be played, changed or deleted at any time. You can
also set a voice tag for a voice dial instead of a voice command (see "Voice dial"

page 11).
The duration of a voice tag is 2 seconds. Up to 15 voice tags can be defined and
shared between voice dial and voice command.

Network

This menu allows you to handle the connection between the phone and the
network, register manually the available networks and manage your
preferred networks.
and press ,.
<New>
Press , and speak
associated with this voice tag or
Settings
Settings >

Voice command

appears, press ,, then follow the instructions
Delete or Play
Change the voice tag
and press ,.
the voice tag, Change the
used for this
29