DeWalt DE7260 Original Instructions Manual page 19

Weight
Properly secure the mitre saw to the stand before
•
operation. Follow the mounting instructions carefully. Fasten
the tool to the saw mounting rails securely as instructed.
• Place the stand on a flat and level surface to prevent
rocking or tipping.
• Take care during the raising and lowering of the product
to reduce the hazard of pinching hands and fingers.
Check the legs and other supports to see that they are
•
properly locked in place before operation.
• Do not modify or use the stand for any operation for
which it is not intended.
• If protection or adjustment device or weld is damaged,
no longer use this rolling mitre saw stand.
Package Contents
The package contains:
2 Mounting rails
1 Foot
2 Wheels
1 Leg extension
1 Hex wrench
1 Vertical lock knobs
1 Horizontal lock knobs
1 Handle
1 Work support extension arm
1 Work support
1 Stop plate
1 Activating lever
Hardware bag 1:
2 Axles
2 Bushings
4 Washers
2 Nuts
Hardware bag 2:
4 M8 x 16 mm button head screws
4 Curved washers
1 M6 x 10 mm button head screw
1 M6 lock washer
1 M8 x 21 mm button head screw with thread locking patch
1 M8 lock washer
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Do not cut packaging contents.
Pinch and Impact Hazard.
Date Code Position (Fig. B)
The date code 33 which also includes the year of manufacture,
is printed into the housing.
Example:
2017 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Mounting rails
1
Foot
2
Wheels
3
Leg extension
4
Hex wrench
5
Vertical lock knobs
6
Horizontal lock knobs
7
Handle
8
Work support
9
extension arm
Work support
10
Stop plate
11
Activating lever
12
Intended Use
This rolling mitre saw stand is designed for use with D
mitre saws. If you have any problem with alignment or
mounting, consult an authorised D
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
DO nOT transport persons or other loads with the ROLLING
MITRE SAW STAND.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
EnGLIsh
Axles
13
Bushings
14
Washers
15
Nuts
16
M8 x 16 mm
17
button head screws
Curved washers
18
M6 x 10 mm
19
button head screw
M6 lock washer
20
M8 x 21 mm button
21
head screw with
thread locking patch
M8 lock washer
22
WALT
e
WALT repair agent.
e
17