Package Contents; Electrical Safety - DeWalt D26676 Original Instructions Manual

EN GLI SH
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
DATE CODE POSITION
The date code, which also includes the year of
manufacture, is printed into the housing.
Example:
2011 XX XX
Year of Manufacture

Package Contents

The package contains:
1 Planer
1 Parallel fence
1 Spanner
1 Gauge
1 Sharpening holder
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1, 3)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. On/off switch
b. Lock button
c. Shavings discharge outlet
d. Planing depth adjustment knob
e. Planing depth graduation
f. Parallel fence tightening bolt
g. Hole for parallel fence
h. Side guard (excluding in some model)
i. Motor cover
j. Drive belt cover
6
k. Kickstand
l. Parallel fence
INTENDED USE
Your high performance planer has been designed for
professional planing of wood.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These planers are professional power tools. DO
NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are
supervised by a person responsible for their
safety. Children should never be left alone with
this product.

Electrical Safety

The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your D WALT tool is double insulated in
E
accordance with EN 60745; therefore no
earth wire is required.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D WALT service organisation.
E
Mains Plug Replacement
(Middle East and Africa)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in
the plug.
• Connect the blue lead to the neutral terminal.
WARNING: No connection is to be
made to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs. Recommended fuse: 13 A.
Using an Extension Cable
If an extension cable is required, use an approved
extension cable suitable for the power input of this
tool (see Technical Data). The minimum conductor
size is 1 mm 2 ; the maximum length is 30 m.
When using a cable reel, always unwind the cable
completely.