Important Information Philips SDV2940/05 Indoor/Outdoor UHF/VHF Television Aerial Important installation information The SDV2940/05 uses a power injection module to power the aerial ampli- fier. It is essential for proper operation of this aerial system that the amplifier be connected between the aerial and any devices such as splitters, matching transformers, networks, etc.
fig.1 fig.2 Installation General tips for installation 1. Try to mount aerial as high as possible – this will extend the range. 2. If mounting inside - mount in such a way that the aerial is installed near a window which will give the aerial a clear view of the transmitter 3.
Page 5
Installation Tighten all screws and nuts to firmly affix the aerial to the wall. Attach the cable to the F connector on the underside of the unit and weather protection boot over the connection. See next steps under – Connections to your TV fig.3 For outdoor mast mount installation: NOTE: Complete all assembly work on the ground.
RG-6 or RG-6 Quad Shield cable. Both of these cables are designed for minimal signal loss over longer cable runs. This will ensure the best possible picture and overall performance. Warranty Warranty information can be found at: www.philips.com/guarantee...
Technical Support Technical Support For Technical support send an email with the model number of the prod- uct and a detailed description of your problem to: Email: accessorysupport@philips.com Printed in China...