Download Print this page

Siemens WTX16.GSM Quick Start Manual

Network nodes with gateway

Advertisement

Quick Links

Use
CE1N2878en
14.07.2005
Siemeca™ AMR
Network nodes
with gateway
The WT...16... network nodes are used to receive and handle the data transmitted
by consumption meters of the Siemeca™ AMR system. They are equipped with a
gateway that can provide data of up to 2,000 meters for remote readout.
WTX16.IP can be read via Ethernet while WTX16.GSM and WTX16.MOD contain a
GSM modem. They are read via the telephone network.
The WT...16... network node is a component of the Siemeca™ system.
It has been designed for use in buildings to create a radio network for receiving and
storing the data transmitted by the consumption meters installed in the building. Com-
munication between several network nodes is via radio also so that no wiring is re-
quired. All measured values acquired by the consumption meters are continuously
exchanged within the network, which means that every network node stores the current
consumption values, the values read out at the end of the month, and the set day val-
ues of all metering devices on the network. Owing to this operating principle, all net-
work data can be read out at any of the nodes, or a Siemeca™ gateway for remote
data transmission can be used with any of the nodes.
The field of use of the Siemeca™ AMR system is described in Data Sheet N2870.
2
WTX16.GSM
WTX16.IP
WTX16.MOD
Building Technologies
HVAC Products
878

Advertisement

loading

Summary of Contents for Siemens WTX16.GSM

  • Page 1 Siemeca™ AMR system. They are equipped with a gateway that can provide data of up to 2,000 meters for remote readout. WTX16.IP can be read via Ethernet while WTX16.GSM and WTX16.MOD contain a GSM modem. They are read via the telephone network.
  • Page 2 All network nodes with gateway can be used in any combination with other Siemeca™ network nodes as long as the maximum number of 12 nodes per network is not ex- ceeded. Network nodes with gateway and integrated M-Bus master (WTX16.GSM and WTX16.IP) can read external M-Bus meters complying EN1434/3. Building Technologies Network nodes with gateway WTX16…...
  • Page 3 It TCP/IP is protected against temporary mains power failures by the backup battery. The network nodes WTX16.GSM and mains power supply WTX16.IP are equipped with a gateway to store data of up to 2000 meters and to...
  • Page 4 Connector for power supply DC 3,6 V Screw terminal for the fixed M-bus connection Connector for M-bus service connection M3 nut to fix the hinged protection lid (WTX16.GSM and WTX16.IP only) Antenna (WTX16.GSM only) SIM card holder (WTX16.MOD only) 10 Indication of mains supply...
  • Page 5 The display of the WT…16… facilitates commissioning work and troubleshooting. In Display addition to the standard display that shows the operating mode of the WT…16…, there are 6 different display levels from “A“ to “H“ that can be selected by the user. Display level Current operating mode WT…16…...
  • Page 6 State of the Display Explanation system Remote access When, from a PC, the WT…16 is accessed with a WTZ.RM radio module, symbol “ “ will appear High-speed For example When all WTT… have their receivers continu- mode ously on so that all new data can immediately be exchanged on the network, 2 dots will ap- pear in the upper half of the display Engineering notes...
  • Page 7 Network nodes WTX16.GSM require a SIM card. For that purpose, SIM card of WTX16.GSM remove the upper section of the WTX16.GSM from the base. Remove the 2 cable connections (power supply and M-Bus) between gateway and base. Then, use a suitable tool (screwdriver or similar) to open one of the two lateral fixing levers so that upper housing section and base can be separated.
  • Page 8 Network nodes WTX16.GSM require a SIM card. The cardholder is easily accessible SIM card of WTX16.MOD 1 SIM card holder The WTX16.IP network node features an Ethernet interface, which connects to the WTX16.IP outside world via an RJ45 connector, where the net-work cable is to be connected.
  • Page 9 Technical features are binding only when expressly agreed upon at the time a contract is concluded. ©2005 Siemens Building Technologies AG Subject to alteration Building Technologies Network nodes with gateway WTX16…...

This manual is also suitable for:

Wt seriesWtx16.ipWtx16.mod