Advertisement
Quick Links
Thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
Wear protective
instructions
gloves
1. SafETy
1.1.
GENEral SafETy
WarNING! use the cabinet on level and solid ground, preferably concrete. Avoid tarmacadam since the cabinet may sink into
‰
the surface.
locate the cabinet in a suitable working area.
9
Keep the cabinet clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the working area.
9
take care of sharp edges when assembling.
9
do NoT use the cabinet for any purpose other than that for which it is designed.
8
do NoT use the cabinet outside.
8
do NoT get the cabinet wet or use in damp or wet locations or areas where there is condensation.
8
do NoT clean the cabinet with any solvents which may damage the surfaces.
8
Note: the assembly of this product may require assistance.
2. INTroduCTIoN
modular storage system ideal for any garage or workshop. Can be easily adjusted and upgraded to suit specific needs. Purchase a simple
base cabinet or create a custom storage system.
standard features include:
• Ball bearing drawer slides throughout.
• Base cabinets are supplied with a worktop as standard.
• Floor cabinets feature adjustable shelves.
• Each unit is supplied with a lock and two keys.
• Supplied flat packed and will require some simple assembly.
• Two door floor and wall cabinets feature perforated pegboard panels on the inside of the doors.
3. SPECIfICaTIoN
model no. ........................................................ APMS84
overall size (W x d x H) .................665 x 460 x 820mm
large Drawer(x2) ............................570 x 370 x 100mm
X-Large Drawer(x2) ........................570 x 370 x 215mm
© Jack sealey limited
instructions for
modular 4 draWEr CaBINET WITH
WorKToP 665mm
model no:
Wear safety
footwear
Original Language Version
aPmS84
APMS84 | Issue 1 13/02/18
Advertisement
Related Manuals for Sealey APMS84
Summary of Contents for Sealey APMS84
- Page 1 Thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 4. CoNTENTS 4.1. check contents prior to assembly. 4.2. contact stockist with regard to any discrepancy. fig.1 5. aSSEmBly 5.1. Assemble Small drawers as per fig.2. fig.2 Original Language Version APMS84 | Issue 1 13/02/18 © Jack sealey limited...
- Page 3 5.2. Assemble large drawers as per fig.3. fig.3 5.3. Assemble base and side panels as per fig.4. fig.4 Original Language Version APMS84 | Issue 1 13/02/18 © Jack sealey limited...
- Page 4 Attach the four legs to the base as per fig.6. 5.8. Position the worktop in place and fix using screws provided. 5.9. ensure all screws are in place and have been tightened. fig.6 Original Language Version APMS84 | Issue 1 13/02/18 © Jack sealey limited...
-
Page 5: Environment Protection
Important: no liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7ar 01284 757500 01284 703534 sales@sealey.co.uk...