DeWalt DE0736 Instructions Manual page 9

Before mounting a tool to the tripod,
check that the legs are firmly set and
that the tripod is wobble free.
Installing the tripod (fig. A & C)
• Release the plastic snap (8) at the end of the
nylon strap holding the tripod legs together.
• Spread the legs (3) apart to install the tripod in
upright position.
• Adjust the legs (3) if required so that each of the
feet (5) is firmly touching the ground.
• Step on each of the foot brackets (4) to press the
feet (5) into soft ground.
• Mount the tool to the tripod.
Adjusting the leg height (fig. A)
• Release the quick-adjust latch (2) of the first leg
(3) to set the desired height. Re-tighten the latch.
• Repeat as for the other legs.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your attachment has been designed to operate over
a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Re-adjusting the quick-adjust latch (fig. B)
• If the quick-adjust latch is loose in the locked
position, tighten the quick-
adjust latch assembly nut (7).
Unwanted products and the
environment
Take your attachment to an authorized D
repair agent where it will be disposed of in an
environmentally safe way.
DE0736.P65
WALT
E
9
E N G L I S H
28-06-2001, 09:28
6