Advertisement
GENERAL OPERATION
TURNING ON THE UNIT
Install the front panel and turn knob @clockwise.
POWER OFF .. . .. . . .. .. .. .. . .. .. .............................. ....
1
Turn knob @counterclockwise.
VOLUME CONTROL .. . ... . .. . .. .. .............................
1
To increase volume, rotate knob@ clockwise. To reduce, rotate counterclockwise.
TONE CONTROL .. . ... . .. . .. .. . ... . ........................... .2
To control the tone, rotate knob @clockwise
to enhance high-frequency sound, and counterclockwise
to enhance low-frequency
sound.
BALANCE CONTROL . .. .. . ... . .. .. ........................ ..4
To control the balance,
rotate knob @ clockwise
to shift the sound to the right channels
and
counterclockwise
to left channels.
FADER CONTROL . .. . .. .. . .. . ... . ........................... ..3
This control adjusts the volume balance between the front and rear speakers. Rotate knob (3 clockwise
to shift the sound to the front speakers, and counterclockwise
to the rear speakers.
-3-
The FADER control has no effect on the output when using a two speaker installation.
Under this condition,
set the FADER control to the center position.
Advertisement
