Creating The Sinumerik Controller - Siemens SINUMERIK 840D Installation Manual

8.2

Creating the SINUMERIK controller

Prerequisite
Determine the following:
● IP address/MAC address of the SINUMERIK controller
● Suitable machine designation
Procedure
1. On the start page of SINUMERIK Integrate, click on "Plant managemant".
- OR -
Open the following URL on the server: Plant management
plant)
2. Click the "Create" button.
3. Create a new machine and enter the IP/MAC address that has been determined and a
suitable machine designation/name.
4. Reload the page.
5. The newly created machine is shown in the overview without a connection state.
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
Installation Manual, 12/2019, A5E44672080B AE
Connecting applications with the SINUMERIK control system
8.2 Creating the SINUMERIK controller
(https://{ServerIP}/configure-
177