Listen To Radio; Tune To A Radio Station; Program Radio Stations Automatically; Program Radio Stations Manually - Philips FWM462/55 User Manual

7 Listen to radio

Tune to a radio station

1
Press TUNER repeatedly to select FM or AM.
2
Press and hold ALBUM +/-
more than 2 seconds.
»
[SEARCH] (search) is displayed.
»
The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station, press
ALBUM +/-
Program radio stations
automatically
You can program a maximum of 40 (FM + AM)
preset radio stations.
1
In the tuner mode, press and hold
PROGRAM more than 2 seconds to
activate automatic program mode.
»
[AUTO] (auto) is displayed.
»
All available stations are programmed in
the order of waveband reception strength.
»
broadcast automatically.
Program radio stations
manually
You can program a maximum of 40 (FM + AM)
preset radio stations.
1
Tune to a radio station.
2
Press PROGRAM to activate program
mode.
»
[PROG] (program) is displayed.
15 EN
/ for
/ repeatedly until
3
Press TITLE+/- / to allocate a
number to this radio station, then press
PROGRAM
4
Repeat the above steps to program other
stations.
Tip
To overwrite a programmed station, store
another station in its place.

Select a preset radio station

1
In tuner mode, press TITLE+/- / to
select a preset number.
Tip
Position the antenna as far as possible from
TV, VCR or other radiation source.
For optimal reception, fully extend and adjust
the position of the antenna.

Change AM tuning grid

In some countries, the AM radio frequency step
between adjacent channels is 10 kHz (9 kHz in
some areas).
1
Select the tuner source.
2
Press and hold on the main unit for
more than 5 seconds.
»
The frequency step is changed to 9
kHz or 10 kHz.
»
All preset stations are erased and need
to be re-programmed.