Page 2
País de Origen: China Nº de Serie: LEA CUIDADOSAMENTE ESTE INSTRUCTIVO AVISO IMPORTANTE Philips Mexicana, S.A. de C.V. no se hace responsable por daños o desperfectos causados por: – Maltrato, descuido o mal uso, presencia de insectos o roedores (cucarachas, ratones etc.).
Page 5
Index English ------------------------------------------------ 6 Español --------------------------------------------- 29 Português ------------------------------------------ 52...
Contents General Information Supplied accessories ... 7 Environmental information ... 7 Safety information ... 7 Preparations Rear connections ... 8–9 Power Antennas Connection Speakers Connection Optional connection ... 9 Connecting a USB device or memory card Connecting a non - USB device Inserting batteries into the remote control ...
IMPORTANT! PLEASE NOTE THAT THE VOLTAGE SELECTOR LOCATED AT THE REAR OF THIS SYSTEM IS PRESET AT 220V FROM THE FACTORY. FOR COUNTRIES THAT OPERATE AT 110V-127V, PLEASE ADJUST TO 110V-127V BEFORE YOU SWITCH ON THE SYSTEM. Supplied accessories – 2 front speakers –...
Preparations Rear connections The type plate is located at the rear of the system. Power – Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made. – If your system is equipped with a Voltage Selector, set the VOLTAGE SELECTOR to the local power line voltage.
FM Antenna ● For better FM stereo reception, connect an outdoor FM antenna to the FM ANTENNA terminal. Speakers Connection Connect the speaker wires to the SPEAKERS (FRONT)terminals, right speaker to "FR" and left speaker to "FL", connect the speaker wires to the SPEAKERS (SURROUND)terminals, right speaker to "SR"...
Controls (illustrations on page 3) Controls on the system and remote control STANDBY ON B – to switch the system on or to standby mode. DISC 1/2/3 (CD 1/2/3) – to select a disc tray for playback. Source selection – to select the following : –...
MIC1/2 – to connect microphones. PROGRAM for CD/ MP3-CD . to programme disc tracks. for Tuner ... to programme preset radio stations. – to connect headphones. MASTER VOLUME (VOL +/-) – to increase or decrease the volume. IR SENSOR – sensor for the infrared remote control.
Basic Functions IMPORTANT! Before you operate the system, complete the preparation procedures. Plug and Play (for tuner installlation) Plug and Play allows you to store all available radio stations automatically. First time setup/power up When you turn on the main supply, "AUTO INSTALL - PRESS PLAY"...
Demonstration mode The system has a demonstration mode that shows the various features offered by the system. To activate the demonstration In standby mode, press and hold 9 on the ● system for 5 seconds to switch to demonstration. To deactivate the demonstration Press and hold 9 on the system for 5 seconds to ●...
Basic Functions Sound control For optimal sound listening, select only one of the following navigation sound controls at a time : MAX, DSC or VAC. MAX Sound MAX sound provides the best mixture of various sound features (DSC, VAC, DBB, for example). ●...
IMPORTANT! – This system is designed for regular discs. Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc., as offered on the market, because they may jam the changer mechanism. – Do not load more than one disc into each tray.
CD/MP3-CD Operations Press OPEN•CLOSE to close the disc tray. "READING DISC" scrolls. The selected disc ➜ tray, playing number of tracks and the playing time will appear on the display. ➜ A lighted button indicates that a disc is loaded on the disc tray.
Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback. Press MODE on the remote control to select: "REPEAT TRACK" – to repeat playback of ➜ the current track. "REPEAT ALL" – to repeat playback of the ➜...
Radio Reception Tuning to radio stations Press TUNER to select TUNER mode. ➜ "TUNER" is displayed. A few seconds later, the current radio frequency will appear on the display. Press TUNER again to select the desired waveband : FM or MW. Press and hold ALBUM -/+ frequency indication starts to change, then release.
Manual Preset Programming Tune to your desired radio station (refer to “Tuning to radio stations”). Press PROGRAM. ➜ starts flashing. PROG ➜ The next available preset number is displayed for selection. To store the radio station to another preset number Press TITLE -/+ ¡...
External Sources Connecting external equipment Connect the audio out terminals of the external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder) to the AUX terminals of your system. Press AUX to select external equipment. ➜ "AUX" is displayed. Note: –...
Page 21
How to organize your MP3/WMA files on the USB mass storage device This Hi-Fi system will browse the MP3/WMA files in the folders/sub-folders/titles order. Example: Root Title 001 Title 002 Title 003 Album 01 Title 001 Title 002 Title 003 Album 03 Title 001 Title 002...
External Sources Ripping function This function enables you to record music to a connected USB mass storage device from any other source (i.e., DISC, TUNER, or AUX) without interrupting your enjoyment of the music. Insert a USB mass device with sufficient free space to the USB DIRECT the set.
Tuner record timer setting This function enables you to set a timer for starting and stopping ripping from the tuner source automatically. IMPORTANT! – Before setting the timer, ensure that the clock is set correctly. Tune to the station you desire to record from. (See "Radio Reception": "Tuning to radio stations"...
Clock/Timer View clock The clock (if it is set) will be shown in standby mode. To view the clock in any source mode (CD or TUNER for example) ● Press CLOCK•TIMER (or CLOCK on the remote control). ➜ The clock is displayed for a few seconds. ➜...
Timer setting The system can switch on to CD, TUNER, or USB mode automatically at a preset time, serving as an alarm to wake you up. IMPORTANT! – Before setting the timer, ensure that the clock is set correctly. – The timer will always be switched on after it has been set.
Specifications AMPLIFIER Total output power ... 1200W Front ... 250Wx2 per channel Rear ... 100Wx2 per channel Subwoofer ... 250Wx2 per channel Signal-to-noise ratio ... 60 dBA (IEC) Frequency response ... 50 – 18000 Hz Input sensitivity AUX ... 1000/2000 mV Output Headphones ...
Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.
Page 28
Troubleshooting “DEVICE NOT SUPPORTED” scrolls on the display. Radio reception is poor. The system does not react when buttons are pressed. Sound cannot be heard or is of poor quality. The left and right sound outputs are reversed. The remote control does not function properly.
Page 34
ACRE BARRA S FRANCISCO CRUZEIRO DO SUL 68-33224432 CASTELO RIO BRANCO 68-32217642 COLATINA RIO BRANCO 68-32249116 GUARAPARI LINHARES ALAGOAS S GABRIEL DA PALHA ARAPIRACA 82-5222367 SAO MATEUS MACEIO 82-32417237 VILA VELHA PALMEIRA DOS INDIOS 82-4213452 VITORIA UNIAO DOS PALMARES 82-32811305 GOÍAS AMAPÁ...