Panasonic AG-CX7 Operating Instructions Manual page 86

Memory card
Table of Contents

Advertisement

[IP ADDRESS]
Sets the IP address.
(Factory setting: [192.168.0.1])
@
NOTE
0 Cannot be set when [USB-LAN IPv4 SETTING] → [DHCP] → [CLIENT] is selected.
[SUBNET MASK]
Sets the subnet mask.
(Factory setting: [255.255.255.0])
@
NOTE
0 Cannot be set when [USB-LAN IPv4 SETTING] → [DHCP] → [CLIENT] is selected.
[DEFAULT GATEWAY]
Sets the default gateway.
(Factory setting: [192.168.0.254])
@
NOTE
0 Cannot be set when [USB-LAN IPv4 SETTING] → [DHCP] → [CLIENT] is selected.
[PRIMARY DNS]
Sets the primary DNS server.
(Factory setting: [0.0.0.0])
[SECONDARY DNS]
Sets the secondary DNS server.
(Factory setting: [0.0.0.0])
CX10
[USB-LAN IPv6 SETTING]
[ENABLE/DISABLE]
Sets whether to use IPv6.
[ENABLE]
[DISABLE]
(Factory setting: [DISABLE])
[DHCP]
Sets whether to use automatic acquisition via DHCP.
[OFF]
[CLIENT]
(Factory setting: [OFF])
[IP ADDRESS]
Sets the IP address.
(Factory setting: [::])
[PREFIX LENGTH]
Sets the prefix length of the subnet.
(Factory setting: [64])
[DEFAULT GATEWAY]
Sets the default gateway.
(Factory setting: [::])
[PRIMARY DNS]
Sets the primary DNS server.
(Factory setting: [::])
[SECONDARY DNS]
Sets the secondary DNS server.
(Factory setting: [::])
[INFORMATION]
[STATUS]
Displays the status of the network function.
Chapter 4 Operation — Menu settings
Uses IPv6.
Does not use IPv6.
Does not use DHCP.
Performs automatic acquisition through DHCP.
- 86 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ag-cx8Ag-cx10

Table of Contents