Adjust The Presser Foot Lever; Thread Cutter - Kenmore 19501 Owner's Manual

* Adjust the Presser Foot Lever
*
Thread Cutter
High Thread
position cutter
Thread
I
+
cutter
Normal up
,
Presser foot
lever fYou
don't need a scissors to cut the thread after you finish sewing. Just use the handy thread
High aoal up
cutter on the back of the Presser Bar above the presser foot holder.
po'sition
1.
Pull thread through the groove until it is taut.
2.
Then pull the thread sharply down and back to cut it.
The Presser Foot Lever raises and lowers your
presser foot.
You can raise it about 1/4" higher for easy removal
of the presser foot or to help you place heavy
fabrics under the presser foot,