Care And Cleaning; What To Do If - Electrolux EWL1AX User Manual

5. CARE AND CLEANING


Clean the front of the appliance with a
soft cloth with warm water and a clean-
ing agent.

To clean metal surfaces use a usual
cleaning agent.

Cleaning and maintenance should only
be carried out by a competent person
under the strict supervision of an adult.
Never use abrasive cleaning materials
on the appliance.

6. WHAT TO DO IF...

The lamp does not operate. The lamp is defective.
The switch does not
operate.
If you cannot find a solution to the
problem yourself, contact your dealer or
the service centre.
We recommend that you write the data
here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
WARNING!
Refer to the Safety chapters.
Stainless steel or aluminium
appliances:
Clean the lamp with a wet
sponge only. Dry it with a soft
cloth.
WARNING!
Refer to the Safety chapters.
Problem
5.1 Removing the lamp

Disconnect the appliance with power
switch (4).

Unscrew with care counter clock wise
the lamp.

Screw clock wise the lamp and clean
the transparent part with care.
Possible cause
The switch is defective.
The necessary data for the service centre
is on the rating plate. The rating plate is in
the inner part of the lamp.
Do not use steel wool, acids or
abrasive materials, as they can
cause damage to the lamp
surface. Clean the control panel
with the same precautions.
WARNING!
Be careful when you change the
lamp. There is a risk of electrical
shock.
Remedy
Replace the lamp.
Call the Service.
........................................
........................................
........................................
7
ENGLISH