Setting The Vcr Clock - Philips VRKD12BL Instruction Book

14 Setting the VCR Clock

Follow the steps below to set your VCR's internal clock. Make
sure:
The VCR is on and in VCR position. (The VCR/TV light will
appear. If it does not, press the VCR/TV button once.)
1
Press the MENU button until the main menu appears.
- M E N U -
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
PICTURE SELECT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
2
Press the PLAY button or the STOP button repeatedly to
select CLOCK SET. Then, press the F.FWD button.
CLOCK SET
MONTH DAY YEAR
– – / – – – – – –
HOUR MINUTE AM/PM
– – : – – – –
3
While the MONTH space is flashing, press the PLAY but-
ton or the STOP button repeatedly until the desired
month appears. Then, press the F.FWD button.
CLOCK SET
MONTH DAY YEAR
0 3 / – – – – – –
HOUR MINUTE AM/PM
– – : – – – –
4
While the DAY space is flashing, press the PLAY button
or the STOP button repeatedly until the desired day
appears. Then, press the F.FWD button.
CLOCK SET
MONTH DAY YEAR
0 3 / 2 0 – – – –
HOUR MINUTE AM/PM
– – : – – – –
5
While the YEAR space is flashing, press the PLAY button
or the STOP button repeatedly until the desired year
appears. Press the F.FWD button. The day of the week will
appear automatically.
CLOCK SET
MONTH DAY YEAR
0 3 / 2 0 2 0 0 1
HOUR MINUTE AM/PM
– – : – – – –
POWER
PAUSE
PLAY
STOP
F. FWD
REW
1
VCR/TV
RECORD
SPEED MENU DISPLAY
EXIT/ C. RESET COUNTER MEMORY
Helpful Hints
• If the clock has never been set, the
CLOCK SET menu may appear
immediately when you press the
MENU button. If this happens, fol-
low the instructions from step 3
above.
• To see the time on the TV, press
the DISPLAY button repeatedly until
the time appears on the screen.
• Power failures that last for more
than one minute can cause you to
lose your clock setting.
• Press the REW(ind) button to go
back one step from the current step
during steps 4-8.
2-5
CHANNEL