Related Manuals for D-Link DSL-1500G v.A1
Summary of Contents for D-Link DSL-1500G v.A1
- Page 1 Console Commands Index and Syntax DSL-1500G v.A1 SHDSL Router for Annex A Document Revision: 0.1 Firmware Version: R2.01.b2t7 1/18 2002/9/13...
- Page 2 I. Console Comment Utility The console comment utility of DSL-1500G is HyperTerminal and following is the setup process. 1. Open “HyperTerninal” program 2. Create a new Connection 2/18 2002/9/13...
- Page 3 3. The Connect using “Com1” 4. The detail port setting is as below. 3/18 2002/9/13...
- Page 4 II. Console Commands Index and Syntax Commands are: Command Description bridge [<command>] - send command to bridge process buffer [<command>] - send command to buffer process bun [<command>] - send command to bun process chips [<command>] - send command to chips process config [<command>] - send command to config process dhcpclient [<command>]...
- Page 5 Bridge: Command Description config <command> - configuration commands device command - Alter bridge configuration ethertype [<port> "any"|"ip"|"pppoe"] - Set or display forwarded packet types filter - Display filtering database filterage [age] - Set or display filter age time flush [<port>] - Flush filtering database on port(s) info - Show version...
- Page 6 Command Description list all open channels <port_name> - Display all open channels on a port list spices - Display all available spices list objects - Display all data objects show system - Show system attributes set system - Set system attributes show device <device_name>...
- Page 7 Command Description l2filter trace - on/off trace Ethernet Device ~ ethernet filter - Show NP filter table Fluorine Driver ~ fluorine address> - Select MII address to read/write fluorine readr> - Read MII register fluorine writer> <value> - Read MII register Chips: Command Description...
-
Page 8: Dhcp Client
Dhcpclient: Command Description config - Displays client configuration file help - Gives help on available commands pool - Show DHCP client pool allocation stats status - Shows status of active lease, or [all] leases trace - Activates trace option(s) untrace - Deactivates trace option(s) version - Show software version... -
Page 9: Dns Relay
Dnsrelay: Command Description config - Show DNS relay configuration help - List help on available commands retry - Set max number of connection/tx retries server - Manually specify DNS server IP address status - Show DNS relay connection status trace - Activate trace option(s) untrace - Deactivate trace option(s) - Page 10 Command Description event unshow - disable display of events as they occur Flashfs: Command Description cat <file> - show file contents config - display flash configuration fsck - file system check, checks FLASH integrity id <x> - display chip ID for device x info - display file system information ls [-l]...
- Page 11 Command Description device flush - remove all interface definitions disable syntax ~ disable [<i/f>] - prevent use of interfaces or just interface <i/f> enable syntax ~ enable [<i/f> [mtu <size>] [<IPaddr>]] - enable use of all interfaces or interface <i/f> if given - set <i/f>...
- Page 12 Command Description relay all | <i/f name> [<i/f name>] [forward] - allow relaying between i/fs rip syntax ~ rip <sub cmd> - execute rip subcommand rip help - list subcommands available role syntax ~ role <1-7> 1 - Router with PPPoE 2 - Router with PPPoA 3 - Router with R1483 4 - Router with IPoA...
- Page 13 Ip_filter: Command Description add help | <command> - set up rules for filter packets delete help | <command> - delete set or rules for filter packets flush help | <command> - flush all setting for filter packets list help | <command> - list setting for filter packets change help | <command>...
- Page 14 - send a loopback cell loopstats <port> <vpi> <vci> <flags> - display loopback stats pmset <port> <vpi> <vci> <flags> - set up reception of activation requests pmclear <port> <vpi> <vci> <flags> - clear reception of activation requests D-Link Confidential 14/18 2002/9/13...
- Page 15 Command Description pmsetauto <port> <vpi> <vci> <flags> - set up auto accept of activation requests pmactivate <port> <vpi> <vci> <flags> - send activate request <txblock> <rxblock> <dir> pmdeactivate <port> <vpi> <vci> <flags> - send deactivate request pmstart <port> <vpi> <vci> <flags> <txblock> - start transmission/reception of PM cells <rxblock>...
- Page 16 Command Description enable - <channel> enable [pppoe]: enable this channel with current settings in either pppoa or pppoe encapsulation event - event [<1-5>]: set/read current event report level hdlc - <channel> hdlc [1|0]: set HDLC headers on this channel info - <channel>...
- Page 17 Command Description ondemand - <channel> ondemand disable | enable [idle_secs]: set pppoe connect-on-demand and idle seconds before drop over this channel r2516 - <channel> r2516 <service name> <ac name> : set pppoe service name and ac name over this channel unnumber - <channel>...
- Page 18 Snmp: Command Description ? syntax ~ snmp help - list commands available snmp help all - list commands and their syntax snmp help <cmd> - list syntax for command access syntax ~ snmp access [read | write] <community> [<IP - allow read-only or read-write access addr>] snmp access delete <community>...