Yamaha R-S700 Service Manual
Hide thumbs Also See for R-S700:
Table of Contents

Advertisement

This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifi cally YAMAHA Products, are already known
and understood by the users, and have therefore not been restated.
WARNING:
IMPORTANT:
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service
departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and
specifi cations are subject to change without notice or obligation to retrofi t. Should any discrepancy appear to exist, please contact the
distributor's Service Division.
WARNING:
IMPORTANT:
■ CONTENTS
To Service Personnel ........................................2–3
Impedance Selector ...............................................3
Front Panels .........................................................4–5
Rear Panels ...........................................................5–6
Remote Control Panels .......................................7
Specifications .......................................................8–9
Internal View .......................................................... 10
Service Precautions ............................................ 10
Disassembly Procedures ............................. 11–13
Updating Firmware .......................................... 14–17
SELF-DIAGNOSTIC FUNCTION ............................ 18–31
1 0 1 1 8 9
R-S700
SERVICE MANUAL
IMPORTANT NOTICE
Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury,
destruction of expensive components, and failure of the product to perform as specifi ed. For these reasons, we advise
all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or
the appointed service representative.
The presentation or sale of this manual to any individual or fi rm does not constitute authorization, certifi cation or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
Amp Adjustment ...............................................32–33
Display Data .......................................................34–35
Ic Data ...................................................................36–38
Block Diagram ........................................................39
Printed Circuit Boards .................................40–55
Pin Connection DiagramS ...................................56
Schematic Diagrams .......................................57–62
Replacement Parts List ................................63–73
REMOTE CONTROL ............................................... 74–79
Advanced Setup ................................................80–82
Copyright © 2010
This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.
RECEIVER
All rights reserved.
P.O.Box 1, Hamamatsu, Japan
'10.10

Advertisement

Table of Contents
loading

Summary of Contents for Yamaha R-S700

  • Page 1 This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifi cally YAMAHA Products, are already known and understood by the users, and have therefore not been restated.
  • Page 2: To Service Personnel

    R-S700 ■ TO SERVICE PERSONNEL AC LEAKAGE 1. Critical Components Information WALL EQUIPMENT TESTER OR OUTLET UNDER TEST EQUIVALENT Components having special characteristics are marked ⚠ and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only)
  • Page 3: Impedance Selector

    R-S700 WARNING: Lithium batteries CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: ADVARSEL! Lithium batteries are dangerous because they can be exploded by improper handling. Observe the Lithiumbatteri –Eksplosionsfare ved fejlagtig håndtering.
  • Page 4: Front Panels

    R-S700 ■ FRONT PANELS R-S700 (U model) R-S700 (C, A models) R-S700 (R model)
  • Page 5: Rear Panels

    R-S700 R-S700 (G model) ■ REAR PANELS R-S700 (U model) R-S700 (C model)
  • Page 6 R-S700 R-S700 (R model) R-S700 (A model) R-S700 (G model)
  • Page 7: Remote Control Panels

    R-S700 ■ REMOTE CONTROL PANELS RAX25 RAX27 RAX26 (U model) (C, A models) (R, G models) RAX28 RAX29 (U model) (C, A models)
  • Page 8: Specifications

    R-S700 ■ SPECIFICATIONS ■ Audio Section ■ FM Section Minimum RMS Output Power (Power Amp. Section) Tuning Range (20 Hz to 20 kHz) U, C models ............87.5 to 107.9 MHz (8 ohms, 0.019 % THD) ........100 W + 100 W R, A, G models ..........
  • Page 9 Apple Inc., registered in the U.S. and other countries. Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with a license agreement. • DIMENSIONS Top view ø...
  • Page 10: Internal View

    R-S700 ■ INTERNAL VIEW Top view OPERATION (12) P.C.B. OPERATION (13) P.C.B. OPERATION (14) P.C.B. (R model) MAIN (2) P.C.B. AM/FM TUNER DOCK P.C.B. FUNCTION (2) P.C.B. FUNCTION (3) P.C.B. FUNCTION (1) P.C.B. MAIN (4) P.C.B. MAIN (1) P.C.B. MAIN (3) P.C.B.
  • Page 11 R-S700 ■ DISASSEMBLY PROCEDURES (Remove parts in the order as numbered.) Disconnect the power cable from the AC outlet. 1. Removal of Top Cover a. Remove 4 screws ( ① ), 4 screws ( ② ) and screw ( ③ ). (Fig. 1) b.
  • Page 12 R-S700 3. Removal of Sub-chassis Unit a. Remove 2 screws ( ⑥ ) and screw ( ⑦ ). (Fig. 2) b. Remove CB11, CB101, CB108, CB503-505, CB513, CB706, CB801 and CB804. (Fig. 2) c. Release 2 hooks and then remove the sub-chassis unit. (Fig. 2) 4.
  • Page 13 R-S700 When checking the P.C.B.s: • Put the rubber sheet and cloth over this unit. Then place the sub-chassis unit on the cloth and check it. (Fig. 4) • Connect the ground point of the sub-chassis unit to the chassis with a ground lead or the like. (Fig. 4) •...
  • Page 14 R-S700 ■ UPDATING FIRMWARE When the following parts are replaced, the firmware must be updated to the latest version. FUNCTION P.C.B. Microprocessor (IC502 on FUNCTION P.C.B.) ● Confirmation of firmware version and checksum Before and after updating the firmware, check the firmware version and checksum by using the self-diagnostic function menu.
  • Page 15 R-S700 ● Connection Disconnect the power cable of this unit from the AC outlet. • Set the switch (SW7) of RS-232C conversion adaptor to the “FLASH UCOM” position. (Fig. 1) • Connect the writing port (CB509 on FUNCTION P.C.B.) located on the rear panel of this unit to the serial port (RS- 232C) of the PC with RS-232C cross cable, RS-232C conversion adaptor and flexible flat cable as shown below.
  • Page 16 R-S700 4. Click [Refer...] and select the firmware name. (Fig. 3) The ID and MCU Type are loaded automatically when the file is selected. (Fig. 3) Click [OK]. (Fig. 3) When [Refer...] is clicked, the “Open” screen appears. Fig. 3 5.
  • Page 17 R-S700 6. Click [E.P.R.], then the “Erase” screen appears. (Fig. 5) 7. Click [OK] to start writing. (Fig. 5) Writing being executed. Fig. 5 8. When writing of the firmware is completed, the screen appears as shown below. (Fig. 6) Click [OK].
  • Page 18: Self-Diagnostic Function

    R-S700 ■ SELF-DIAGNOSTIC FUNCTION This unit has self-diagnostic functions that are intended for inspection, measurement and location of faulty point. There are 8 main menu items, each of which has sub-menu items. Listed in the table below are main menu items and sub-menu items.
  • Page 19 R-S700 ● Starting Self-Diagnostic Function — U, C, A models — While pressing the “DIMMER” and “PRESET <” keys, press the “MAIN ZONE ” key to turn on the power. The self-diagnostic function mode is activated. Keys of this unit "MAIN ZONE...
  • Page 20 R-S700 ● Canceling Self-Diagnostic Function Before canceling self-diagnostic function, execute setting for FACTORY PRESET of main menu No. 3. (Memory initialization inhibited or Memory initialized). In order to keep the user memory preserved, be sure to select PRESET INHIBIT (Memory initialization inhibited).
  • Page 21 R-S700 2-2. When the protection function worked due to abnormal DC output. D C   P R T : x x x H   AD conversion value when the protection function is working Cause: DC output of the power amplifier is abnormal.
  • Page 22 R-S700 ● Operation procedure of Main menu and Sub-menu There are 8 main menu items, each of which has sub-menu items. Main menu selection Select the main menu using “AM” (forward) and “FM” (reverse) keys. Sub-menu selection Select the sub-menu using “TUNING >>” (forward) and “TUNING <<” (reverse) keys.
  • Page 23 26 – 43 44 – 67 128 – 158 187 – 210 Model Model name R7 (R-S700) A/D conversion value (5.0 V=255) 9 – 25 1-5. VERIFY V e r i f y   2 5 5 Not for service.
  • Page 24 R-S700 2. DISPLAY This menu is used to check the FL display. FL display 2-1. INITIAL DISPLAY 2-2. ALL SEGMENT OFF 2-3. ALL SEGMENT ON After check, change to next sub-menu at once. 2-4. ALL SEGMENT DIMMER 2-5. CHECK PATTERN Lighting on segments in lattice.
  • Page 25 R-S700 3. FACTORY PRESET This menu is used to reserve/inhibit initialization of the back-up IC (EEPROM: IC503 on FUNCTION P.C.B.). 3-1. PRESET INHIBIT (Initialization inhibited) 3 . P R E S E T   I N H I Initialization of the back-up IC is not executed. Select this sub-menu to protect the values set by the user.
  • Page 26 R-S700 4-2. TA/TB Temperature of the heatsink is detected. TA: The voltage at 84 pin (THM_L) of the IC502 is displayed. TB: The voltage at 83 pin (THM_R) of the IC502 is displayed. Normal value: TA/TB 10 to 85 (Reference voltage: 5.0 V=255) * If TA or TB becomes out of the normal value range, the protection function works to turn off the power.
  • Page 27 R-S700 4-4. REC OUT SWITCH/DOCK TYPE REC OUT SWITCH: REC OUT switch is detected. The voltage at 97 pin (REC) of the IC502 is displayed. (Reference voltage: 5.0 V=255) When the A/D conversion value of the REC OUT switch becomes out of the specified range, normal operation will not be available.
  • Page 28 R-S700 5. DOCK 5-1. LOOP BACK CHECK This menu is used to check the DOCK connector without the iPod itself. With the power turned off, short the pins of the DOCK connector as shown in the figure below. Start up the self-diagnostic function and select this menu.
  • Page 29 R-S700 6. PROTECTION HISTORY This menu is used to display the history of protection function. All history of protection function will be erased by pressing the “CLEAR” key. Numeric values in the figure are given as reference only. 6-1. History 1 6 - 1 .
  • Page 30 R-S700 SIRIUS (U model) This menu is used to display the information of SIRIUS. 7-1. SIRIUS S I R I U S :   - - Connection of the SIRIUS antenna module is checked. OK : Normal NG : Abnormal : No connected 7-2.
  • Page 31 R-S700 8. POWER OFF FACTOR HISTORY This menu is used to display the history of power off factor. 8-1. History 1 8 - 1 . P A N E L   S W 8-2. History 2 8 - 2 . R E M O C O N 8-3.
  • Page 32: Amp Adjustment

    R-S700 ■ AMP ADJUSTMENT ● CONFIRMATION OF IDLING CURRENT 1. Right after power is turned on, confirm that the voltage across the terminals of R156–R159 (L ch) and R157–R158 (R ch) are between 0.1 mV and 10 mV. 2. If measured voltage exceeds 10 mV, open (cut off) R139 (L ch), R142 (R ch) and reconfirm the voltage.
  • Page 33 R-S700 SCHEMATIC DIAGRAM MAIN (1) L ch R156 0.1 mV – 10 mV R139 R159 Cut off R142 R ch R157 Cut off 0.1 mV – 10 mV R158...
  • Page 34: Display Data

    R-S700 ■ DISPLAY DATA ● V701 : 16-BT-164GNK (OPERATION P.C.B.) PATTERN AREA ● PIN CONNECTION Pin No. 59 58 Connection F2 NX Pin No. 20 19 Connection Note : 1) F1, F2 ..Filament pin 2) NP ..No pin 3) NX ..
  • Page 35 R-S700 ● ANODE CONNECTION 1G-14G – – – – – – – – – – – – – – – – – – – –...
  • Page 36 R-S700 ■ IC DATA IC502: R5F364AENFA (FUNCTION P.C.B.) Single chip 16-bit microprocessor Port P0 Port P1 Port P1 Port P3 Port P4 Port P5 VCC2 ports Internal peripheral functions System clock generator UART or clock synchronous serial I/O Timer (16-bit)
  • Page 37 R-S700 Function Name Port Name Detail of Function (P.C.B.) P9_6/ANEX1/SOUT4 NC P9_5/ANEX0/CLK4 TRIG CONTROL +12V control P9_4/DA1/TB4IN MPLED LED control for MAIN POWER ON display P9_3/DA0/TB3IN FL_N_RST FL initial clear control P9_2/TB2IN/SOUT3 FL_MOSI FL communication serial data P9_1/TB1IN/SIN3 FL_N_CE FL communication chip select...
  • Page 38 26 – 43 44 – 67 128 – 158 187 – 210 Model detection for A/D port Model input (A/D) pull-up resistance 10 k-ohms R516 (FUNCTION P.C.B.) 0.15 – 0.49 Model name R7 (R-S700) A/D conversion value (5.0 V=255) 8-25...
  • Page 39: Block Diagram

    R-S700 ■ BLOCK DIAGRAM → → FUNCTION OPERATION SCHEMATIC DIAGRAM SCHEMATIC DIAGRAM IC801 UNBALANCE BALANCE NJM2068MD-TE2 IC602 CD DIRECT AMP BALANCE UNBALANCE 36,37 1,100 SPEAKERS POWER AMPLIFIER MUTE 40,41 8,10 SP A Lch PURE DIRECT IC802 29.0dB iPod VIDEO NJM2068MD-TE2...
  • Page 40: Printed Circuit Boards

    R-S700 ■ PRINTED CIRCUIT BOARDS FUNCTION (1) P.C.B. (Side A) DOCK (CB303) OPERATION (1) (CB701) MAIN (1) DOCK OPERATION (12) OPERATION (13) (CB302) (W105) (CB2) (CB14) Writing port W502 CB511 W503 CB506 CB508 CB503 CB502 CB501 CB505 CB513 CB504 CB515...
  • Page 41 R-S700 POINT A XL501 (Pin 13 of IC502) POINT B 1 / IC502 (99 pin, +5M), 2 / IC502 (12 pin, N_RST) FUNCTION (1) P.C.B. (Side B) IC502 IC502 (+5M) (+5M) IC502 IC502 (N_RST) (N_RST) AC POWER ON AC POWER OFF...
  • Page 42 R-S700 FUNCTION (2) P.C.B. FUNCTION (3) P.C.B. (Side A) (Side A) LINE U, C, A models U, C, A models ZONE 2 TAPE REMOTE TRIGGER PHONO JK601 JK602 JK603 JK604 U, C, A models DOCKR DOCKL AGND SIRIR U, C, A models...
  • Page 43 R-S700 FUNCTION (2) P.C.B. FUNCTION (3) P.C.B. (Side B) (Side B) U, C, A models U, C, A models U, C, A models • Semiconductor Location Ref no. Location Ref no. Location D401 D606 D402 D607 D403 D608 D404 D609...
  • Page 44 R-S700 OPERATION (1) P.C.B. (Side A) FUNCTION (1) (CB503) OPERATION (8) (W701B) W701A CB701 SW713 SW712 W703A ZONE 2 ZONE 2 CONTROL OPERATION (13) (CB11) SW710 SW709 SW708 SW706 SW704 SW702 SW707 SW705 SW703 SW701 U, C, A models OPERATION (9)
  • Page 45 R-S700 OPERATION (1) P.C.B. (Side B) U, C, A models • Semiconductor Location Ref no. Location D705 D706 D709 D710 D718 D719 IC701 Q701 Q704...
  • Page 46 R-S700 OPERATION (2) P.C.B. OPERATION (3) P.C.B. (Side A) (Side A) MAIN (1) (CB101) AGND CB803 W803 AGND OPERATION (4) (CB951) MAIN (1) (W101) AGND SW802 CD DIRECT AMP AGND SW801 PURE DIRECT CDL-O CDL+O AGND AGND CDR-O CDR+O AGND...
  • Page 47 R-S700 OPERATION (2) P.C.B. OPERATION (3) P.C.B. (Side B) (Side B) IC901 • Semiconductor Location Ref no. Location IC801 IC802 IC901...
  • Page 48 R-S700 OPERATION (4) P.C.B. OPERATION (5) P.C.B. OPERATION (6) P.C.B. OPERATION (7) P.C.B. (Side A) (Side A) (Side A) (Side A) LOUDNESS FLAT/-30dB OPERATION (13) (W10) INPUT VOL_RA VOL_RB FUNCTION (1) (CB505) SW711 FUNCTION (1) (CB513) SW851 VOLUME JK701 AGND...
  • Page 49 R-S700 OPERATION (4) P.C.B. OPERATION (5) P.C.B. OPERATION (6) P.C.B. OPERATION (7) P.C.B. (Side B) (Side B) (Side B) (Side B) OPERATION (8) P.C.B. OPERATION (9) P.C.B. OPERATION (10) P.C.B. OPERATION (11) P.C.B. (Side B) (Side B) (Side B) (Side B)
  • Page 50 R-S700 OPERATION (12) P.C.B. OPERATION (13) P.C.B. (Side A) (Side A) FUNCTION (1) U, C, A, G models (W502) AC IN FUNCTION (3) -15V (W601) AGND_RTN (U, C, A models) +15V AGND_TRG +15V_TRG FUNCTION (1) (W503) CB21 OPERATION (1) (W702)
  • Page 51 R-S700 OPERATION (12) P.C.B. OPERATION (13) P.C.B. (Side B) (Side B) U, C, A, G models R model R model OPERATION (14) P.C.B. (Side B) R model • Semiconductor Location Ref no. Location Ref no. Location...
  • Page 52 Notes) R-S700 Safety measures • Some internal parts in this product contain high voltages and are dangerous. Be sure to take safety measures during servicing, such as wearing insulating gloves. • Note that the capacitors indicated below are dangerous even after the power is turned off because an electric charge remains and a high voltage continues to exist there.
  • Page 53 R-S700 MAIN (1) P.C.B. MAIN (4) P.C.B. (Side B) (Side B) IC103 • Semiconductor Location Ref no. Location D109 D110 D112 D113 D114 D117 D118 D119 D120 D121 IC103 Q125 Q126 Q128 Q130 MAIN (3) P.C.B. (Side B) Q131 Q132...
  • Page 54 R-S700 MAIN (2) P.C.B. (Side A) MAIN (2) P.C.B. (Side B)
  • Page 55 R-S700 DOCK P.C.B. DOCK P.C.B. (Side A) (Side B) FUNCTION (1) (CB508) OPERATION (12) (CB21) +5.5SUB IC301 SIRI_MISO IPD_APDET W301 SIRI_MOSI DOCK_PON UAW_PON SIRI_PON DOCK_TYP IPD_N_DET IPD_N_VON IPD_MISO IPD_MOSI IC309 IC306 IC311 AGND_VIDEO SIRIL SIRIR AGND_DOCK IC302 DOCKL DOCKR FUNCTION (1) •...
  • Page 56: Pin Connection Diagrams

    R-S700 ■ PIN CONNECTION DIAGRAMS • ICs • Transistors 2SA1015-Y 2SA1037K 2SA1145 2SA1358 O,Y 2SA1694 O,P,Y 2SA1708 2SA970-GR, BL LC72725KM-UY-TLM-E LE24C023M-TLM-E LM61CIZ NJM2068MD-TE2 NJM2388F05 2SC3421 O,Y 2SC4467 O,P,Y 2SC4488 1. V 2. V 3. GND 4. ON/OFF CONTROL 2SA2220 2SB1257...
  • Page 57: Schematic Diagrams

    R-S700 SCHEMATIC DIAGRAMS FUNCTION 1/2 IC402: LC72725KM-UY-TLM-E RDS signal demodulation IC VREF FLOUT Vdda Vddd CLOCK RECOVERY REFERENCE (57kHz) (1187.5Hz) VOLTAGE Vssa Vssd VREF 57kHz MPXIN ANTIALIASING SMOOTHING DATA RDDA (SCF) DECODER FILTER FILTER RDCL RDS-ID/READY RDCL Page 59 Page 59...
  • Page 58 R-S700 FUNCTION 2/2 FUNCTION (3) JK601 JK602 W601 15.6 REMOTE Page 60 (U, C, A models) to OPERATION (13)_CB19 JK603 (U, C, A models) CB601 Page 57 to FUNCTION (1)_CB515 (U, C, A models) JK604 12.3 15.6 15.6 15.0 TRIGGER (U, C, A models) 15.6...
  • Page 59 R-S700 OPERATION 1/2 OPERATION (10) OPERATION (2) CD DIRECT AMP CB806 W802 indicator (12) PURE DIRECT indicator (14) PURE DIRECT OPERATION (3) (12) (13) VOL OUT (14) OPERATION (4) 15.6 TONE IN TONE OUT IC901 (12) 15.6 15.6 IC802 IC801...
  • Page 60 R-S700 OPERATION 2/2 CB26 OPERATION (14) R model CB26 -23.6 CB11 CB10 -16.8 CB13 -16.8 40.3 Page 59 -23.6 to OPERATION (1)_W702 -23.0 -41.2 -23.0 -40.4 POWER 22.5 TRANSFORMER 22.7 Page 61 to MAIN (1)_W104 Page 59 220V – 240V 110V –...
  • Page 61 R-S700 MAIN Notes) Safety measures Page 60 to OPERATION (13)_CB13 40.3 AC78.7 CB104 -41.2 to POWER TRANSFORMER 53.9 (44.0) 5 k-ohms 10 W AC64.2 IMPEDANCE -53.8 SELECTOR HIGH (-43.9) 5 k-ohms 10 W 20.8 20.8 20.8 20.8 13.2 13.2 20.2 12.6...
  • Page 62 R-S700 DOCK IC301: TC7SET32FU 2-input OR gate IN B IN A OUT Y IC302: TC7SB66FU Signal bus switch (analog) IC301 Page 57 to FUNCTION (1)_CB508 IC306: TC7WZ32FK (TE85L, F) Dual 2-input OR gate IC304 8 Vcc 7 1Y 6 2B 5 2A No replacement part available.
  • Page 63: Replacement Parts List

    R-S700 ■ REPLACEMENT PARTS LIST • ELECTRICAL COMPONENT PARTS WARNING ● Components having special characteristics are marked ⚠ and must be replaced with parts having specifications equal to those originally installed. ABBREVIATIONS IN THIS LIST ARE AS FOLLOWS: C.A.EL.CHP : CHIP ALUMI.ELECTROLYTIC CAP JUMPER.TST...
  • Page 64 R-S700 P.C.B. FUNCTION Ref No. Part No. Description Markets Ref No. Part No. Description Markets WV014000 P.C.B. FUNCTION C457 UR037470 C.EL 47uF WV014100 P.C.B. FUNCTION C458 UR037100 C.EL 10uF WV014200 P.C.B. FUNCTION * C459 UR038330 C.EL 330uF WV014400 P.C.B. FUNCTION C460 UR237100 C.EL...
  • Page 65 R-S700 P.C.B. FUNCTION and P.C.B. OPERATION Ref No. Part No. Description Markets Ref No. Part No. Description Markets * IC501 YC289A00 IC RP130Q501D-TR CB706 VB858200 CN.BS.PIN * IC502 YC731A00 IC.CPU R5F364AENFA (unwritten) CB801 VF283100 CN.BS.PIN * IC503 YA765A00 IC LE24C023M CB803 VQ044300 CN.BS.PIN...
  • Page 66 R-S700 P.C.B. OPERATION Ref No. Part No. Description Markets Ref No. Part No. Description Markets C719-720 US035100 C.CE.CHP 0.1uF 16V B ⚠ * F1 VV071800 FUSE 4A 250V C721 UM397470 C.EL 47uF ⚠ * F4 VV071800 FUSE 4A 250V C722 US035100 C.CE.CHP...
  • Page 67 R-S700 P.C.B. OPERATION and P.C.B. MAIN Ref No. Part No. Description Markets Ref No. Part No. Description Markets * VR901 WP293500 VR G 25kΩ (EVJC50FA3GF4) C139 WJ611000 C.MYLAR 0.047uF 100V * VR902 WP293400 VR B 20kΩ (EVJC50FA3B2) C139 WJ611400 C.MYLAR 0.1uF...
  • Page 68 R-S700 P.C.B. MAIN and P.C.B. DOCK Ref No. Part No. Description Markets Ref No. Part No. Description Markets Q130-135 WC883400 TR 2SD2704 K C327 UR037100 C.EL 10uF Q136 WC435100 TR.DGT KRC104S-RTK C328-332 WB570100 C.MYLA.CHP 0.0001uF 16V * Q137 WR859300 TR...
  • Page 69 R-S700 Carbon Resistors Value 1/4W Type Part No. 1/6W Type Part No. Value 1/4W Type Part No. 1/6W Type Part No. 1.0 Ω HJ35 3100 HF85 3100 11 kΩ HF45 7110 HF45 7110 ✻ 1.8 Ω 3180 12 kΩ 7120...
  • Page 70 R-S700 • OVERALL ASS'Y G model 2-1 (12) 2-1 (13) Front panel unit G model Amp unit 5 (2) 5 (1) 5 (3) R model Sub-chassis unit G model 201-1 200-1 U, C, R models 2-1 (14) 2-1 (2) A, G models...
  • Page 71 R-S700 Ref No. Part No. Description Remarks Markets Ref No. Part No. Description Remarks Markets * 2-1 WV017400 P.C.B. ASS'Y OPERATION ACCESSORIES * 2-1 WV017500 P.C.B. ASS'Y OPERATION * 200 WV500400 REMOTE CONTROL RAX25 000-001101460 * 2-1 WV017700 P.C.B. ASS'Y...
  • Page 72 R-S700 • FRONT PANEL UNIT and SUB-CHASSIS UNIT Ref No. Part No. Description Remarks Markets 2-122 * 1-1 WU981800 FRONT PANEL * 1-1 WU982000 FRONT PANEL * 1-1 WU982200 FRONT PANEL * 1-1 WV036400 FRONT PANEL * 1-1 WV046800 FRONT PANEL...
  • Page 73 R-S700 • AMP UNIT Ref No. Part No. Description Remarks Markets # ⚠ 3-1-1 VP768600 PAIR TRANSISTOR 2SA1694/C4467 OPY Q121, Q123 3-1-5 VV849300 RADIATION SHEET 19x24 3-1-6 VP922500 DAMPER 2x10x170 3-1-7 VK173200 TRANSISTOR SCREW 3x15 SP MFC2 # ⚠ 3-2-1...
  • Page 74: Remote Control

    R-S700 ■ REMOTE CONTROL ● RAX25: U model / RAX27: C, A models / RAX26: R, G models SCHEMATIC DIAGRAM PANELS RAX25 RAX27 RAX26 In-system programming point (U model) (C, A models) (R, G models) 10 ohms TV CH TV CH...
  • Page 75 R-S700 KEY NO. LAYOUT KEY CODE (RAX25/RAX27) RAX25/27 RECEIVER / DEVICE SIRIUS or [A] TUNER DOCK LINE3 (BD) LINE2 (DVD) LNE1 (CD-R) TAPE PHONO MAIN ZONE2 FUNCTION ID2 (default) ID2 (default) (Default: 2064) (Default: 2082) (Default: 5083) (Default: 5082) (Default: 5087)
  • Page 76 R-S700 KEY CODE (RAX26) RAX26 RECEIVER / DEVICE TUNER DOCK LINE3 (BD) LINE2 (DVD) LNE1 (CD-R) TAPE PHONO ID2 (default) FUNCTION MAIN MAIN (Default: 2064) (Default: 2082) (Default: 5083) (Default: 5082) (Default: 5087) (RECEIVER) 7E 81-2A D5 7E 81-2AD4 SLEEP...
  • Page 77 R-S700 PRESET CODE How to set the preset method 1st. Press and hold K64 [CODE SET] key on the RC for more than 3 seconds. RAX25 Press the “INPUT” key (K10 [TAPE] or K11 [CD] or K13 [LINE1] or K14 [LINE2] or K15 [LINE3]).
  • Page 78 R-S700 RAX26 SIRIUS or [A] TUNER DOCK LINE3 (BD) LINE2 (DVD) LINE1 (CD-R) TAPE PHONO TV POWER Key No. Label 2064 2082 5067 5085 0082 0080 ID2 (Default) ID2 (Default) ID2 (Default) MAIN MAIN MAIN MAIN MAIN ID2 (Default) MAIN...
  • Page 79 R-S700 ● RAX28: U model / RAX29: C, A models SCHEMATIC DIAGRAMS KEY NO. LAYOUT KEY CODE KEY CODE ZONE2 In-system Programming point FUNCTION ID2 (default) RECEIVER RECEIVER DOCK TUN./CH / ENTER 100 ohms (POWER) 7E-BB ← 7E-BB45 ← TUNING...
  • Page 80: Advanced Setup

    R-S700 ■ ADVANCED SETUP (U, C, A models)
  • Page 81 R-S700 (R, G models)
  • Page 82 R-S700...
  • Page 83 R-S700 MEMO...
  • Page 84 R-S700...

Table of Contents