Technical Specifications Of Field Device - Siemens SIPROCESS GA700 Operating Instructions Manual

Technical specifications

10.2 Technical specifications of field device

10.2 Technical specifications of field device
Table 10-1
General
Installation position
Weight
Transport weight (with packaging, man‐
ual, etc.)
Degree of protection
Table 10-2
General
Installation position
Weight
Transport weight (with packaging, man‐
ual, etc.)
Degree of protection
Table 10-3
Electrical characteristics
Auxiliary power supply
Power consumption
EMC interference immunity (electro‐
magnetic compatibility)
Electrical safety
Power supply unit cable
Table 10-4
Electrical inputs and outputs
Digital outputs (DO)
Digital inputs (DI)
Standard Ethernet interface (bottom)
Service interface (inside at PU)
88
Field control unit: General technical specifications
Field module: General technical specifications
Field control unit: Electrical characteristics
Field control unit: Electrical inputs and outputs
Wall-mounting
27 kg
31.5 kg
IP55 according to EN 60529
Vertical
28.5 kg
31 kg
IP65 according to EN 60529
100 to 240 V AC (nominal range of use 85 to 264 V)
50 to 60 Hz (nominal range of use 47 to 63 Hz)
280 VA max.
In accordance with the standard requirements of NA‐
MUR NE21 (05/2006) and EN 61326-1 (01/2008)
In accordance with EN 61010-1, overvoltage category II
Max. diameter 10 mm, max. 3 x 2.1 mm
5, with changeover contacts, can be freely parameterized,
e.g. for measuring range identification; max. load: 24 V AC/
DC/1.7 A, isolated, non-sparking
5, designed for 24 V, isolated, freely parameterizable, e.g. for
autoranging
Ethernet RJ 45, 100 MBit
Ethernet RJ 45, 100 Mbit
Operating Instructions, 05/2015, A5E35640463-02
2
Field device