Miele EVS 7110 Operating And Installation Instructions page 51

Aligning the front of the drawer
After installing the combination
appliance, it may be necessary under
certain circumstances to align the front
of the drawer and adjust the gap
between the drawer and the
combination appliance. To help you do
this, there are 2 screws behind the
drawer front with which the front is fixed
to the drawer housing.
 Open the drawer.
 Loosen the fixing screws  on the
right and left of the drawer housing.
Do not remove the screws
completely, as the front may fall off.
 Push the drawer front up or down a
little to correct the alignment and the
gap.
 Tighten up the fixing screws.
Installation
51