Toshiba OIS40R Specifications

Remote operator interface station for toshiba t-series plcs

Hide thumbs Also See for OIS40R:

Download this manual

Remote Operator Interface Station

For Toshiba T-Series PLCs

The OIS40R is the same OIS (Operator Interface Station) as the OIS40 except that the PLC

communication port is selectable, RS232 or RS485. As a result, its location is not limited to the 2 m

maximum distance from the PLC like the OIS40. It can be located up to 1000 m (a little over ½ mile)

from the PLC.

Another new feature on the OIS40R is that the keypad overlay is included separately. The overlay

can easily be stuck on the OIS40R or replaced by a custom overlay which better describes the

application—giving the operator more guidance on operation / data entry.

Standard features include:

♦

20 Character by 4 Line Display

♦

Numeric Key Pad for Data Entry

♦

Unlimited Screens & Tasks

(except by available memory)

OIS40R

Programmable Controllers

♦

8 Function / Macro Keys

♦

8 User Programmable LEDs

♦

16 Definable Alarms

(can be logged & printed)

April 2003

Page 1 Another new feature on the OIS40R is that the keypad overlay is included separately. The overlay can easily be stuck on the OIS40R or replaced by a custom overlay which better describes the application—giving the operator more guidance on operation / data entry.
Page 2 (or equivalent), 9 pin D shell (male & female) Note: The OIS40R has a 9 pin D shell female connector for connection to the PLC. This connector can be setup as either RS485 or RS232. For RS485 connection, one end of the Beldon 9830 cable must be terminated with a 9 pin D shell (male) connector.