Toshiba P000233790 Owner's Manual page 21

Macintosh OS 9 AirPort Settings
If you are using the AirPort wireless connection, first verify the PCX5000 wireless link is turned on.
Refer to the "PCX5000 Wireless Configuration" page in this manual.
Step 1: Using the
described previously to set the Ethernet
TCP/IP configuration,
TCP/IP (Setup Ethernet) panel and select
"AirPort" in the Connect via choice box.
Then select "Using DHCP Server" in the
Configure choice box.
prompted to save the changes.
Step 2: At the Macintosh Desktop, double
click on the "Macintosh HD" icon, and
navigate to the "AirPort Setup Assistant"
icon located in
Utilities/Assistants folder.
"AirPort Setup Assistant" application by
double clicking the icon.
your computer to join an existing AirPort
network". Press the right arrow button to
continue.
same procedure
navigate to the
You will be
the Applications/
Launch the
Select " Set up
1
The Setup Assistant will scan for nearby
802.11b wireless base stations. If the
PCX5000 is in range, it will respond with a
message announcing it has joined the
network.
If the AirPort Assistant cannot find a wireless
network, verify the Macintosh is in range of
the PCX5000 and that the PCX5000 has
had the wireless option turned on.
Step 3: If the AirPort Setup Assistant is
successful in finding the PCX5000 wireless
base station, it will display a panel stating,
"The AirPort Assistant is now ready to
configure your computer to access the
network "PCX5000"."
Ahead" button to proceed.
Step 4: After several seconds, you will be
notified that the AirPort Assistant was
successful, and prompted to press the
"Connect Now" button. After pressing the
"Connect Now" button, your browser
should launch automatically.
Step 5: You should now be able to access
the Internet. You should immediately enable
wireless encryption. With a 10/100 Ethernet
connection,
"http://192.168.100.1". Proceed now to the
"PCX5000 Wireless
section of this manual to set the wireless
security options.
Press the "Go
open location:
Configuration"