Toshiba 1600EP Series Instruction Manual page 45

Data Setting Screens (Cont'd)
the following screens show the procedure for setting the data variables. they are accessed from the
main Data Setting screens (see
baUD rate: 1200
to aCCept: Set
baUD rate: 2400
to aCCept: Set
baUD rate: 4800
to aCCept: Set
baUD rate: 9600
to aCCept: Set
loops through four
possibilities
aUto batt teSt: no
to aCCept: Set
aUto batt teSt: yeS
to aCCept: Set
loops through both
possibilities
interVal: 1 Day
to aCCept: Set
interVal: 2 Day
to aCCept: Set
interVal: 99 Day
to aCCept: Set
loops through 99
possibilities
1600ep Series instruction manual
page 33) when the SHIFT/SELECT key is pressed:
Set
Shift baUD rate: 1200
+
to Change:SeleCt
monitor
Select
Set
Shift baUD rate: 2400
+
to Change:SeleCt
monitor
Select
Shift Set baUD rate: 4800
+
to Change:SeleCt
Select monitor
Shift Set baUD rate: 9600
+
to Change:SeleCt
Select monitor
returns to Data Setting screens
(with new value applied)
Shift Set aUto batt teSt: no
+
to Change:SeleCt
Select monitor
Shift Set
aUto batt teSt: yeS
+
to Change:SeleCt
Select monitor
returns to Data Setting screens
(with new value applied)
Shift Set
interVal: 1 Day
+
to Change:SeleCt
Select monitor
Shift Set
interVal: 2 Day
+
to Change:SeleCt
Select monitor
Shift Set interVal: 99 Day
+
to Change:SeleCt
Select monitor
returns to Data Setting screens
(with new value applied)
this parameter allows the correct
communication baud rate to be set.
Default is 9600 baud.
if set to yeS, the unit will perform a
periodic test at the interval set in the
battery test interval parameter.
Default is no.
the battery test interval variable se-
lects the interval in days that the bat-
tery test will be conducted. the op-
tions cycle through 1 to 99.
Default is 1 day.
37