Philips PentaFlood Installation Instructions

CAUTION:
The installation and servicing of these products should be performed by a qualified electrician or service
personnel.
WARNING:
To avoid electrical shock, TURN POWER SUPPLY OFF before installing or servicing this unit. Wire
fixtures in accordance with the national electrical code and any applicable local code requirements.
Top / Full Visor: Fig. 1
1. Fill up the notched areas between glass and door frame with RTV silicone as shown.
2. Attach clips between glass and door frame at notches area in frame as shown, ensure clip presses into
silicone.
3. Assemble visor to clips with the screws provided.
External Louvre: Fig. 2
1. Fill up the notched areas between glass and door frame with RTV silicone as shown.
2. Attach four clips between glass and door frame at notched area in frame as shown, ensure clip presses into
silicone.
3. Assemble external louvre to clips with the four screws provided.
© 2016 Philips Lighting Holding B.V. All rights reserved.
www.philips.com/luminaires
443561063590/5900508-000 Rev. C
Page 1 of 2
INSTALLATION INSTRUCTIONS
PentaFlood - Accessories