Incoming Call Ringing Patterns - Toshiba Strata CT User Manual

Before You Begin
To Flash the hookswitch
While on a call, flash
(press) the hookswitch
down about 1/2 second,
then release it.
Some Exchange line features, such as conferencing or behind PBX operation require "flashing the
Exchange line," to then dial the PBX feature access code or extension numbers.
To flash an Exchange line
1. Momentarily press the
hookswitch for about 1/2
second or press your
recall button.
2. Press
3. You can now dial a PBX
feature access code or
extension number.

Incoming Call Ringing Patterns

Your telephone ringing pattern is set in system programming.
Some systems may use the internal call ring pattern—one second ON, three seconds OFF—for
incoming outside calls.
A distinct outside call ring pattern—0.4 seconds ON, 0.2 seconds OFF, 0.4 seconds ON, three seconds
OFF—is available.
2
You hear dial tone after flashing the hookswitch. Some
telephones may have a special button which flashes the
hookswitch.
Note
After you press the hookswitch or recall, you hear dial tone.
This hookflashes the Toshiba system only.
#45
. You hear PBX dial tone.
The hookswitch is located in the handset cradle of your
telephone.
Strata CT Standard Telephone User Guide November 2001
Features