Step 8 Adding Stands - Fujitsu SMARTCASE S520 Assembly Instructions Manual

Assembly Instructions SMARTCASE S520

Step 8 Adding Stands

The chassis kit includes a desk stand for vertical use and four rubber feet for horizontal use.
They desk stand can be fixed by plastic clips, in addition there are screws included for more secure stand assembly.
Bottom of the chassis
Assemble the two M2.5x6.0 screws with 0.25Nm for the desk stand (blue) or
the four screws M3x5 for the rubber feet (red).
__________________________________________________________________________________________________________________________________________________________
Page 12 of 12 V1.1 - 07/2019 www.fujitsu.com